Stanat Wire Shaping Line With Dancer & Traverse Take-Up, (12310)

Manufacturer

STANAT

Category

Wire Machines

Type

WIRE MACHINERY, FLATTENING MILLS

Stock

12310

Model

None listed

Dealer Location

Connecticut

Request a Quote

Spec Sheet

MACHINE #12310

SPECIFICATIONS


-TYPE: WIRE SHAPING MILL- TWO INDEPENDENT CAPSTANS
DANCER

AND TRAVERSING TAKE UP REEL.

-SETUP: THIS MILL IS DESIGNED SO THAT EACH CAPSTAN IS
OPERATED INDEPENDENTLY. THE USER CAN INSTALL A

DIE BOX (TO PERFORM A MINOR DRAW ON THE
INCOMING MATERIAL) OR A TURKSHEAD (TO PERFORM

THE FIRST OF TWO SHAPE PASSES ON THE PRODUCT) IN
FRONT OF THE FIRST CAPSTAN AND THEN FINISH THE

SHAPING OF THE PRODUCT BY USING THE 2ND CAPSTAN

TO PULL THE PRODUCT THROUGH THE INCLUDED FENN

MODEL 4U HIGH SPEED TURKSHEAD.




-CAPSTANS
-QUANTITY: 2

-SIZES
- 1ST CAPSTAN: 24" (610mm) DIAMETER

- 2ND CAPSTAN: 30" (762mm) DIAMETER

-DRIVE MOTORS AND REDUCER
- 1 ST CAPSTAN
-DRIVE MOTOR: 15 HP 1770 RPM AC MOTOR
208/220/440 VOLTS
42/40/20 AMPS

-REDUCER: ADJUSTO-SPEDE (EDDY CURRENT)
MAX RPM: 1700
MIN RPM: 100
CLUTCH VOLTS: 110
CLUTCH AMPS: 1.70

- 2ND CAPSTAN
-DRIVE MOTOR: 20 HP 1750 RPM AC MOTOR
230/460 VOLTS
52/26 AMPS

-REDUCER: ADJUSTO-SPEDE (EDDY CURRENT)
MAX RPM: 1800
MIN RPM: 100
VOLTS: 45
AMPS: 4.10

NOTES: MILL IS EQUIPPED WITH A 1 7/8" (48mm) DIAMETER ARBOR IN FRONT OF EACH

CAPSTAN FOR MOUNTING A GUIDE TYPE IDLER ROLL (ROLL NOT INCLUDED) AND A

MECHANICALLY OPERATED SNUBBER UNIT IN FRONT OF THE 2ND CAPSTAN. ALTHOUGH THERE

IS A VERTICAL PLATE IS IN FRONT OF THE 1ST CAPSTAN THAT CAN BE USED TO MOUNT A

TURKSHEAD OR DIE BOX, MOUNTING HOLES HAVE NOT BEEN DRILLED. THERE ALSO IS AN

INTERNAL TANK FOR COOLANT AND A SMALL PUMP MOUNTED IN PLACE TO DELIVER COOLANT

BUT THE USER IS RESPONSIBLE FOR THE PIPING REQUIRED TO GET THE COOLANT FROM

THE PUMP TO THE DESIRED LOCATION.

-TURKSHEAD: TO BE PROVIDED BY PURCHASER


-3 ROLL DANCER
-TYPE: 2 FIXED ROLLS- 1 MOVABLE ROLL COUPLED TO

TRANSDUCER FOR SPEED CONTROL ON THE TAKE UP
REEL.

-ROLL SIZE: 8" (2003.2mm)

-TRAVERSING TAKE UP REEL
-TYPE: BALL SCREW TYPE TRAVERSE

-TRAVERSE LENGTH: APPROX 12" (304.8mm)

-MANDREL SIZE: 5" (127mm) DIA X 18" (457.2mm) LONG FACE

-DRIVE MOTOR: APPROX 5 HP (TO BE VERIFIED)

NOTE: WITH THE EXCEPTION OF DRIVE MOTORS, THERE ARE NO ELECTRICS WITH THIS

LINE. PURCHASER TO SUPPLY.

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote