No. ZFWZ 250/3 WMW, 10" Work Dia., 45° Angle, Tailstock, Well Tooled, 1979

Manufacturer

WMW

Category

Gear Machines

Stock

gh250x

Model

ZFWZ 250/3

Dealer Location

Illinois

Spec Sheet

WMW Model ZFWZ 250/3 Gear Hobbing Machine

S/N: 9658 New: 1979

EQUIPPED WITH:
Tailstock. Hydraulic Work Clamping. Change Gears and Arbors with Gear Cabinet. Coolant System. Magnetic Chip Conveyor. Any Available Manuals and Drawings.

SPECIFICATIONS:
Maximum Diameter of Workpiece 10"
Normal Diametral Pitch 4
Maximum Axial Feeding Travel 10.75"
Maximum Tangential Feeding Travel (hobshift) 4"
Maximum Helix Angle 45°
Min. No. of Teeth Cut using Standard Indexing 8
Min. No. of Teeth Cut using an Indexing Mechanism
for Small No. of Teeth 4
Maximum Hob Diameter 5.75"
Maximum Hob Length 6.7"
Diameter of Working Surface of the Table 10.85"
Diameter of Hole in Work Table 7.87"
Depth of Hole in Work Table
(with hydraulic work clamp device removed) 2.95"
Dist. Hob Center to Working Surface of Table: Min. 7.75"
Dist. Hob Center to Working Surface of Table: Max. 18.5"
Dist. Hob Center to Center of Worktable: Min. 0.8"
Dist. Hob Center to Center of Worktable: Max. 9"
Hob Speeds (Infinitely Variable): Low 50-200 RPM
Hob Speeds (Infinitely Variable): High 125-400 RPM
Feeds (Infinitely Variable): Axial 0.01"-0.40"/Rev of workpiece
Feeds (Infinitely Variable): Radial 0.001"-0.16"/Rev of workpiece
Feeds (Infinitely Variable): Tangential 0.005"-0.20"/Rev of workpiece
Main Motor 12 HP
Wired for 3/60/460V
Approximate Weight 14,500 lbs.

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote