Dealer Location


Spec Sheet

  Matrix 2500 CNCMatrix 2500 CNC (Siemens 828D Basic)
Working Area
Table dimensions98x22 in
Table load capacity7,700 lbs
Spindle nose-to-table surface distance8 - 32 in
Spindle center-to-stand distance24 in
Number of T-slots5 positions
T-slots, width0.7 in
T-slots, spacing3.9 in
ControlFanuc Oi MF (5) Siemens 828D Basic
Travel X-axis98.4 in
Travel Y-axis22 in
Travel Z-axis22 in
Spindle speed8,000 rpm
Spindle mountBT40
Torque, constant668
Rapid Feed
X axis rapid feed81.75 fpm
Y axis rapid feed98.1 fpm
Z axis rapid feed98.1 fpm
Work feed X-axis33 fpm
Work feed Y-axis33 fpm
Work feed Z-axis33 fpm
Tool Head
Number of tool stations20 positions
Tool ¯80 in
Tool length (max.)8 in
Tool weight max.18 lbs
Tool-change time tool/tool8 sec
Tool-changing time chip/chip2 sec
Positioning accuracies0,010 (full travel) in
Repeatabilities±0.008 in
Drive Capacity
Motor rating main drive20.1 Hp
Main drive, continuous load14.75 Hp
Motor rating for X-axis drive4 Hp
Motor rating for Y-axis drive4 Hp
Motor rating for Z-axis drive4 Hp
Measures and Weights
Overall dimensions (length x width x height)197x99x99 in
Weight13,860 lbs

  • The machine design has been optimized as part of a finite element analysis to improve the mechanical performance under high loads
  • This structureÕs extremely high load capacity and a solid cast-iron machine table with moveable column make this the perfect machining solution for very large and very heavy parts
  • The long milling bed allows machining of very long parts, or it can be used to set-up several parts to be machined in one operation
  • High-quality preloaded ball screws and roller linear guides ensure maximum precision and reliability
  • High quality in every detail: The hand-ground mating surfaces allow tight tolerances and ensure an extra long machine life
  • Sturdy telescoping covers on all axes protect the guideways from dust and coolant splatter
  • The spindle motor features a high torque for powerful machining under high loads
  • Powerful and user-friendly Fanuc or Siemens CNC controls with milling and drilling functions

  • Compact, rugged and maintenance-free operator-panel CNC with dedicated system software for turning, milling and grinding technologies
  • High-quality, rugged, magnesium die-cast operator panels with degree of protection IP65
  • Maintenance-free operator panel front, e.g. no fan, battery or hard disk
  • Highest machining precision with 80-bit NANOFPaccuracy
  • New user interface SINUMERIK Operate Ð same look and feel as SINUMERIK 840D sl
  • ShopTurn/ShopMill (option): Very fast programming time in the production of individual parts and small batches
  • Advanced Surface: Innovative, high-performance CNC functions provide top quality of workpiece surface with minimum machining times
  • Technology package SINUMERIK MDynamics with the new function Advanced Surface: Perfect workpiece surfaces and very fast machining times in molded part production
  • programGUIDE: fastest machining time and maximum flexibility for large series productions
  • Unique spectrum of technology cycles Ð ranging from the machining of any turning and milling contour with residual material detection to in-process measurements
  • G-Tech is a grinding package with an extensive scope of CNC functions ranging from the low-cost entry-level model up to highly productive machines
  • Animated Elements: Unique operating and programming support with moving picture sequences
  • modern data transfer options via USB stick, CF card and network (Ethernet)
  • SINUMERIK Integrate for production Access MyMachine /Ethernet permits remote diagnostics from anywhere in the world
  • Easy Message: Integrated mobile radio modem for optimum process monitoring and maximum machine availability via text messages (SMS)
  • Easy Extend: Flexible handling of machine units, e.g. an A axis/parts machine
  • Maintenance scheduler: Signaling of pending maintenance tasks in accordance with specified maintenance intervals


  • Operator panel variants for horizontal or vertical operator panel housings
  • Proximity/clearance sensor for smart display control
  • Integrated QWERTY full CNC keyboard with short-stroke keys
  • Additional Ethernet interface at the rear of the CNC for connection to factory network
  • Additional USB interface at the rear of the CNC for machine control panel
  • Integrated PLC based on the SIMATIC S7-200 command set with ladder logic programming
  • I/O interface based on PROFINET for the connection of PLC I/O devices and a machine control panel
  • Up to 5 axes/spindles
  • 1 analog spindle
  • 1 machining channel/mode group
  • Integrated tool management with tool life monitoring
  • Configurable user screens with SINUMERIK Integrate for engineering Run MyScreens (Easy Screen)
  • SINUMERIK Integrate for engineering Run MyRobot /EasyConnect for simple interfacing of robots and handling systems
  • Integrated data archiving procedure for simple data updates

  • siemens 828 D Basic control
  • 20 station automatic tool changer with dual arm
  • chain type chip conveyor + cart
  • 4th axis preparation (wiring only)
  • electronic hand-wheel
  • CF card reader
  • coolant system
  • 3-color signal lamp (LED)
  • coolant gun
  • compressed air gun
  • automatic central lubrication
  • enclosure
  • heat exchanger for electric box
  • machine feet
  • spindle blow-out system
  • work lamp

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote