2020 PIRANHA 88 TON MODEL #P-88 HYDRAULIC PUNCH: STOCK 12056

Manufacturer

PIRANHA

Category

Punches

Stock

12056

Model

088 P-88

Dealer Location

Ohio

Spec Sheet




MAXIMUM SPECIFICATIONS (rated on mild steel)

Punching (88 Tons)

1-1/16” diameter through 1” plate

Throat Depth

9”

Bending (Optional)

24”, 36”, 48” w/4-way die block

Round Bar Shear

1/4" through 1-1/2"

Square Bar Shear

1/2” through 1”

Flat Bar Shear

8” x 3/4”, 12” x 5/8”, 24” x 1/4”

Angle Shear

5” x 5” x 3/8”

Coping/Notching

2-3/4” x 4” x 1/4”

Motor

10 HP

Weight

4,700 Lbs.

STANDARD EQUIPMENT

Automatic Hold Down Coupling Wrench

Punch Holder, Stripper, & Die Block Chip Bucket

5 Punch & Die Sets 9/16” through 1-1/16” Extra Filter Element

Set of Angle Knives Two (2) Foot Switches

Set 1” Round Bar Knives Instruction/Parts Book/Video Link

Set of 20-5/8” Plate Shear Knives Set of Coper Knives




STANDARD FEATURES

1. Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.

2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.

3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.

4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.

5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut.

6. Coper Notcher- the low rake angle keeps part flat and under control during notching.


WARRANTY

Twelve (12) months, covering parts against defects in materials or workmanship.


No Video Available

Want to request a quote from the owner of this listing?

Request a Quote