JONES & SHIPMAN UNIVERSAL CYLINDRICAL GRINDER

Stock

21032

Model

1300

Dealer Location

Pennsylvania

Spec Sheet



10" X 27" JONES & SHIPMAN UNIVERSAL CYLINDRICAL GRINDER

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $14,500.00



HMC Stock # 21032-P

Machine Serial No.: Unknown

Machine Model No.: 1300

New Date: Unknown



Machine Has Been Reconditioned by Andmar Machinery Services



Maximum Swing: 10"

Distance Between Centers: 27"

Adjustment of Table (Included Angle): 17 Degrees

Longitudinal Table Speed: 3 to 144 Inches per Minute

Minimum Stroke of Table: .040"

Manual Table Traverse per Revolution of Handwheel: .5"

Fine Hand Feed Traverse Knob Graduations: .0002"

Feed at Reversal of Table, Reduction in Diameter: .0002" to .0012"



WHEEL HEAD:

Wheel Head Swivel: 180 Degrees Each Side of Normal Position

Cross Feed Handwheel Dial Graduations: .0002"

Auto Infeed at Table Reversals: .0001" to .0006"

One Press of Fine Feed Lever: .0001" Off Diameter

Wheel Speeds: 1,750 and 2,300 RPM

Wheel Size: 12" O.D. x 1" Thick x 5" Mounting Hole

Cross Traverse of Wheel Head: 7"

Internal Grinding Speeds: 16,000 RPM, 9,900 RPM,

and 23,000 RPM with Correct Internal Spindles

*Not Equipped with All Necessary Internal Spindles

Internal Grinding Capacity: 3/4" x 2" Diameter



WORK HEAD:

Spindle Speeds: 40, 60, 90, 140, 210, 320 RPM

Spindle Taper: #3 Morse Taper Sleeve

(Internal Taper is Believed to be #45)

Swivel of Work Head: 0 to 90 Degrees

Work Head Center Type: Live or Dead Center

Maximum Distance Faceplate (Work Yead at 90 Degrees)

and New Grinding Wheel: 2-3/16”

Taper in Tailstock: #3 Morse



EQUIPPED WITH:

EIU Type Wheel Head

Built-In Internal Grinding Drive in Wheel Head that Uses Cartridge Type Spindles

Continuous In-Feed (Plunge Grinding)

Self-Contained Internal Hydraulic System

Table Mounted Wheel Dresser

5" 6-Jaw Chuck

(1) Work Support, 2 Point

(2) Internal Grinding Spindles

(3) Wheel Hubs

One Shot Lubrication Pump

Work Light

5-1/2 HP Main Motor

NO Coolant Pump or Tank

Wired for 3 Phase, 60 Cycle, 220 Volts

Overall Size: 96" LR x 55" FB x 75" High x 5,400 Lbs.



Machine Has Been Reconditioned by Andmar Machinery Services

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote