2.5" x .157" Olimpia80 HF 6 Position Quick Change Stainless Tube Mill Line (2003)

Manufacturer

OLIMPIA80

Category

Tube Machinery

Type

TUBE MILLS, HF/ERW

Stock

604837

Model

None listed

Dealer Location

Michigan

Request a Quote
View Contact Information

Spec Sheet

Tube Diameter - 2.5 inches


Manufacturer: Olimpia80

Year: 2003

Diameter Range: 18mm (.70") to  63.5mm (2.5")

Thickness Range: 1mm (0.039") to 4mm ( .157")

Max Speed: 100mpm

Max Tube Length: 6 meter

 

Product Range:

 

Round Diameter Dimensions: 19.1mm, 25.4mm, 31.8mm, 38.1mm, 50.8mm, and 63.5mm

 

Square Dimensions: 15x15mm, 20x20mm, 25x25mm, 30x30mm, 40x40mm  and 50x50mm

 

Rectangular Dimensions: 20x10mm, 30x15mm, 30x20mm, 40x20mm, 50x30mm and 60x40mm

 

Complete Tube Mill Line with the Following Components:

 

Double End Mandrel Uncoiler

4 Ton per Arm Coil Weight

Strip width: max. 300 mm

Coil Inner Diameter: min. 400 mm - max. 550 mm

Outer coil diameter: max. 1400 mm

 

Shear and End Welder

 

Double Vertical Accumulator

15Ton coil weight Total

 

6 Position Revolving Forming and Sizing Section

* Machine Capable of Change the Sizes of Tooling  Using a 6 Position "Revolver Style" Changing Mechanism

Individual Servo Motors in Each Stand

Single Point Adjustment on All Stands

1O motorized rotating heads (7 in forming and 3 in calibration) and

1O idle side carriages (7 in forming and 3 in calibration

12 positions for mounting the roller shafts i, 6 on the upper support and 6 on the lower one.

 50 mm Diameter Shaft

11 roller alignment system is simple and is operated by side screws.

The distance between the center of the heads of 650 mm.

11 complete change of equipment is carried out automatically in 15-20 minutes

 

Solid Estate High Frequency Thermatool TIG and Plasma Welding Systems in Controlled Atmosphere

 

Brushing Section and External Weld Grinder

 

BRUSHING MACHINE FOR SQUARE TUBES AND RECTANGLES

6 BRUSHING HEADS

 

DOUBLE DIE CUTTING SYSTEM (2007)

Maximum line speed: 30 - 35 m/min

Minimum tube length: 4000 mm

Cutting rail length : 4200 mm

Cutting disc diameter: 250 mm

Cutting disc speed : 15 m/min for HSS discs / 60 m/min for discs

with carbide inserts

Cutting accuracy : +/- 1 mm

 

Run Out Table For pipes of a Lenght max. of 6 m

 

Complete with Controls, Electrics, Tooling, Manuals and Drawings

 

Installed and Running

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote