GRINDERS, CYLINDRICAL, CNC USED MACHINERY FOR SALE

HILDEBRAND MACHINERY CO., INC.

2023 Blackbridge Road, York PA 17402-1993 Phone: (717) 846-2600 Fax: (717) 845-9497


8" X 25" Okuma GA 26-T CNC Angle Hd Cyl Grinder, Okuma OSP-U10G CNC Ctrl, '05 (18322)
Hildebrand Machinery Co., Inc. (717) 846-2600 sales@hildebrandmachinery.com


Click on the photo(s) above for a larger view.


Back to
Search Results

OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER
PRICE:  Loaded on Truck, Our Warehouse, York, PA …… $89,500.00

HMC Stock No. 18322-P
Machine Serial No. 118028
Machine Model No. GA26-T
New Date:  October 2005

Maximum Grind Diameter:  7.87"
Maximum Distance Between Centers:  25.60"
Maximum Workpiece Weight:  110 Lbs.
Swing Over Table:  12.99"
Wheel Travel X Axis:  16.54"
Maximum Wheel Size:  24" x 10" x 5.9"
Wheelhead Speed Range:  Infinitely Variable 106.30 IPM
Wheelhead  Motor:  10 HP
Wheehead Feed Motor:  3 HP
Saddle Feed Motor:  3 HP
Workhead Speed:  Infinitely Variable 650 RPM
Workhead Motor:  3 HP
Workhead Tapered Bore:  #4 Morse Taper
Sept. 2018, Workhead was Disassembled, Cleaned and
   Reassembled with New Bearings, Seals and Belts
Tailstock Quill Travel:  1.97", 3.15"
Tailstock Taper:  #4 Morse

EQUIPPED WITH:
CNC Control:  Okuma OSP-U10G
Swing Out Part Gauging System with (3) Selections:  Work Location,
   Gauge 2 and Gauge 3
Over the Wheel Power Wheel Dresser
Grinding Wheel Lifter Unit
Jib Crane Mounted to Machine, 485 Lb. Capacity with Manual Chain Hoist
Rear Mounted Coolant System with Magnetic and 30" Wide Continuous
   Fabric Filters
Sludge Cart
Door interlock Switch for:  Enable and Disable
NC Panel Switch for:  Edit Lock – Lock – Unlock
3-1/2" Floppy Disc Backup of Software Discs
Pulse Generator
RS232-C 25 Pin Port
Hard Way Covers
Machine Running Hours:  38,079  (date: 10-4-18)
Machine Operating Hours:  13,798
Machine Cutting Time Hours:  12,225
Spindle Run Time Hours:  13,530 
Workhead Repairs, New Bearings, Seals and Belts Installed 10-4-18
The Following Manuals in  PDF form: Operation – Maintenance, Parts Book, CNC System Operation
Full Load Amps 75.1 / 34.4
30 KVA Electric Transformer, 3 Phase 60 Hz
   Primary Input:  200-240-380-415-440-480 Volts
   Secondary:  200-240 Volts
Machine is Wired for 3 Phase 60 Hz, 480 Volts

DIMENSIONS:
Overall Machine Size:  99" LR x 97" FB x 101" High x 13,000 Lbs. Approx.
   (Height is to Top of Jib Crane Post with Machine on 4" Blocks)
Coolant System:  61" x 47" x 29" High
Transformer:  20" x 22" x 23" High
(2) Small Hydraulic Units:  25" x 14" x 23" High Each

View all HILDEBRAND MACHINERY CO., INC. listings
View more OKUMA
View more GRINDERS, CYLINDRICAL, CNC