Viewing 13,433 Results
Seller is MDNA

USED ZWICK ROELL 200KN TENSILE / BOND UNIVERSAL TEST MACHINE, YEAR 2011, STOCK# 10621

Manufacturer

ZWICK / ROELL

Type

TESTERS, HARDNESS

Stock

10621

Dealer Location

Michigan

Seller is MDNA

Zimmermann FZ37 5-axis CNC Bridge Mill

Manufacturer

ZIMMERMANN

Type

MACHINING CENTERS, GANTRY TYPE, CNC

Stock

13482

Dealer Location

Michigan

Seller is MDNA
Featured Machine

Zimmermann FZ37 5-axis CNC Bridge Mill

Manufacturer

ZIMMERMANN

Type

MACHINING CENTERS, GANTRY TYPE, CNC

Stock

13481

Dealer Location

Michigan

Seller is MDNA

3.5 CU FT ZERO 7.5 HP SHOT WHEEL TUMBLE TYPE SHOT BLAST MACHINE: STOCK #12725

Manufacturer

ZERO

Type

BLAST CLEANING / AIR & SUCTION

Stock

12725

Dealer Location

Ohio

Seller is MDNA

(SET) 21" X 23" X 35-1/2" ANGLE PLATES: STOCK #73829

Manufacturer

ZERO

Type

ANGLE PLATES

Stock

73829

Dealer Location

Ohio

Seller is MDNA

ZERO DUST COLLECTOR: STOCK #15234

Manufacturer

ZERO

Type

AIR COMPRESSOR ACCESSORIES

Stock

15234

Dealer Location

Ohio

Seller is MDNA

Zeks 400 cfm Cycling Refrigerated Air Dryer w/ new compressor unit

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17125

Dealer Location

Michigan

Seller is MDNA

Zeks 300 cfm Cycling Refrigerated Air Dryer

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17124

Dealer Location

Michigan

Seller is MDNA

Zeks 300 cfm Non-Cycling Refrigerated Air Dryer

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17124

Dealer Location

Michigan

Seller is MDNA

1200 CFM, 125 PSI, Zeks No. 1200HSDA40G, 5 HP, Thermal Mass Cycling, 1994

Manufacturer

ZEKA

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

None

Dealer Location

Florida

Seller is MDNA

2013 Zeiss Accura II 12/42/10 RDS Coordinate Measuring Machine (CMM) (#33204)

Manufacturer

ZEISS

Type

MISCELLANEOUS

Stock

33204

Dealer Location

California

Seller is MDNA

Zeiss Spectrum 700 Coordinate Measuring Machine CMM, 27.5" X 27.5" X 22.8"

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

4662

Dealer Location

Michigan

Seller is MDNA

Zeiss Prismo 9.12.7, 35"x47"x27", Vast XT Scan Hd, Probe Chg Rack, C99 Ctrllr, Calypso 5.4

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32635

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 7.7.6 Aktiv, 27.6"x27.6"x23.6", Calypso 5.2.18.01, C99 Ctrllr, Vast XT Sensor

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32283

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 10/12/16 CMM, 2007, 39.4"x47.2"x23.6", 2015 Calypso Softw, Vast XT Scan

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32506

Dealer Location

California

Seller is MDNA

Zeiss Contura 776, 2006, 27.6"X27.6"X23.6", Calypso Software, Vast XT Scan, C99 Controller

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32770

Dealer Location

California

Seller is MDNA

Zeiss Contura 10.12.6 w/Rds, 39"x47"x24", Rds, Calypso Software, Probe Change Rack, 2014

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32654

Dealer Location

California

Seller is MDNA

Zeiss Contrua 7.10.6, 700x1000x600mm, DCC Ctrl, VAST XT Probing, PC-DMIS CAD++

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

700

Dealer Location

Ontario

Seller is MDNA

ZED MODEL STP 80 TON DIE CUTTER PRESS: STOCK #70670

Manufacturer

ZED

Type

PRESSES, STAMPING

Stock

70670

Dealer Location

Ohio

Seller is MDNA

Zayer BFU 4000 Horizontal Boring Mill

Manufacturer

ZAYER

Type

BORING MILLS, HORIZONTAL, PLANER TYPE, CNC

Stock

12083

Dealer Location

Michigan

ZAGAR SINGLE HEAD DRILL PRESS MODEL 789-0500, 1/2 HP, 6" STROKE, 5520 RPM, QUILL FEED

Manufacturer

Zagar

Type

MACHINING CENTERS, VERTICAL, CNC (Incl. Pallet Changers)

Stock

Ez22459

Dealer Location

California

Seller is MDNA

2014 CNC EDM DRILL, LARGE TRAVELS-LOW PRICE, INSPECT UNDER POWER

Manufacturer

YOUGAR

Type

ELECTRIC DISCHARGE MACHINES, (Small Hole), CNC

Stock

None

Dealer Location

Wisconsin

Seller is MDNA

YOU JI VTL3000ATC Used CNC Vertical Lathe For Sale - 2008

Manufacturer

YOU JI

Type

LATHES, VERTICAL TURRET

Stock

32207

Dealer Location

Michigan

Seller is MDNA

49" You Ji YV-1200 ATC+C, 63" Swing, 53" U.R, 350 RPM Tbl, 2400 RPM Milling Spdl, C-Axis, Fanuc 0i-TC CNC, 2006, #31755

Manufacturer

You Ji

Type

BORING MILLS, VERTICAL, CNC

Stock

31755

Dealer Location

New York

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.

Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |

Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |

Rigger Style Versa Lift Forklift

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

A&M specializes in CNC Swiss, Precision Turning Centers, Ultrasonic Cleaning Systems and General CNC Machinery

Requested by: Automatics & Machinery Phone | 7202046510 Email | steve@automatics.com Interested |

Up to 3” ERW Tube Mill Up to 6” ERW Tube Mill Up to 12” ERW Tube Mill

Requested by: National Machinery Exchange Phone | 19733446100 Email | andreia@nationalmachy.com Interested |

Wanted (2) CNC Surface Grinders – Horizontal Spindle Reciprocating Table machines 16”x40” or 24”x40” ideally would like Chevalier Models SMART-B1640III or SMART -B2440III but will consider comparable.

Requested by: Appraisals for industry Phone | 2032473991 Email | caseymulqueen@gmail.com Interested |