Search through dealer requests for all types of machines, tools and accessories, or post a wanted request to get contacted by a seller.

All Wanted Listings | 1-25 of 48 Results

20" diameter, 3Jaw Chuck-4.9" bore - semi steel ,D1-11 Mount- Heavy Duty- 20" Diameter 6 jaw chuck , 4.9" Bore -semi steel ,D1-11 Mount Heavy duty

Requested by: Easton Machinery Inc. | (610) 253-7141 | eastonmachinery@msn.com

CNC Turning Center with 30" over the Cross Slide and 30" + between centers. 2010 or Newer

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies | (215) 672-8878 | used@jbmtechnologies.com

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies | (215) 672-8878 | used@jbmtechnologies.com

20 to 45 Ton Flywheel Type O.B.I. or GAP Frame Press. Must have 16" FB Bolster, 12" FB RAM, 16" between uprights, 12" SH

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Nakamura Tome WT-250 with Y-Axis / Parts Catcher / Parts Conveyor / Bar Feeder / Chip Conveyor.

Requested by: Fabricating & Production Machinery, Inc. | (508) 885-9973 | tom@fpminc.com

Small Lathe 13" x 40" w/ DRO

Requested by: Fabricating & Production Machinery, Inc. | (508) 885-9973 | tom@fpminc.com

Looking for a Hurco VM1, 2008 or Newer, Clean, Not Beat Up. Must have Chip Auger

Requested by: A. Green Co., Inc. | (508) 791-6800 | sales@agreenco.com

HLV-H-EM Hardinge Precision Lathe. This model only. Must be wired for 3/60/480 volt operation

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Model 1021 Hansford Die Handler

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Need a Miyano BNE-51MSY (preferred) or BNX-51MSY CNC Lathe, Later Vintage. Will consider similar models, but must have capabilities like these models, and hold tight tolerances.

Requested by: A. Green Co., Inc. | (508) 791-6800 | sales@agreenco.com

16" width x 1mm light (aluminum/copper)

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

16-16 Barber-Colman Multicycle Gear Hobber with plunge & differential

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

T&H Stainless Tig Tube Mill for 1/2" - 1-1/2" OD

Requested by: Universal Tube & Rollform | (419) 872-2364 | sales@utubeonline.com

6-10 Barber Colman Gear Hobber with plunge feed

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Hardinge HLV-H-EM, must have metric threading & wired for 3/60/480V operation

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

6"-14" x 60"-84", 30" wheel, behind the wheel dresser, late model

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

28"+ x 12' centers Engine Lathe, 16"+ swing over cross slide. Must have steady rest. In/mm.

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

24" x 144" Plain Cylindrical Grinder or larger with 30" wheel. Prefer Norton or Cincinnati

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

1" Hill Acme Upsetter

Requested by: Adams Machinery Co. | (847) 673-0556 | adams@adamsmachinery.com

Uncoiler, 8000 To 10,000 Lb. Powered, On Sliding Base, 36"-48" Coil Width, 16"-20" Coil I.D.

Requested by: Westbrook Engineering | (866) FOR-SAWS | joe@westbrook-eng.com

Plate Roll, 1/2"- 5/8" X 10' Four Roll Plate Roll, Must Be Late Model, No New Machines

Requested by: Westbrook Engineering | (866) FOR-SAWS | joe@westbrook-eng.com

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul | (631) 249-5566 | paul@prestigeequipment.com

Horizontal Bandsaw, With 40" X 40" Cutting Capacity, Any Brand

Requested by: Westbrook Engineering | (866) FOR-SAWS | joe@westbrook-eng.com

Parts Washer, 46" Min Width, Conveyor/Monorail Type, Wash/Rinse/Heated Blow Off

Requested by: Westbrook Engineering | (866) FOR-SAWS | joe@westbrook-eng.com