Viewing 2,822 Results
Category - Miscellaneous Machines
Seller is MDNA

3.5 CU FT ZERO 7.5 HP SHOT WHEEL TUMBLE TYPE SHOT BLAST MACHINE: STOCK #12725

Manufacturer

ZERO

Type

BLAST CLEANING / AIR & SUCTION

Stock

12725

Dealer Location

Ohio

Seller is MDNA

Zeks 400 cfm Cycling Refrigerated Air Dryer w/ new compressor unit

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17125

Dealer Location

Michigan

Seller is MDNA

Zeks 300 cfm Cycling Refrigerated Air Dryer

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17124

Dealer Location

Michigan

Seller is MDNA

Zeks 300 cfm Non-Cycling Refrigerated Air Dryer

Manufacturer

ZEKS

Type

MISCELLANEOUS

Stock

17124

Dealer Location

Michigan

Seller is MDNA

2013 Zeiss Accura II 12/42/10 RDS Coordinate Measuring Machine (CMM) (#33204)

Manufacturer

ZEISS

Type

MISCELLANEOUS

Stock

33204

Dealer Location

California

Seller is MDNA

Zeiss Spectrum 700 Coordinate Measuring Machine CMM, 27.5" X 27.5" X 22.8"

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

4662

Dealer Location

Michigan

Seller is MDNA

Zeiss Prismo 9.12.7, 35"x47"x27", Vast XT Scan Hd, Probe Chg Rack, C99 Ctrllr, Calypso 5.4

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32635

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 7.7.6 Aktiv, 27.6"x27.6"x23.6", Calypso 5.2.18.01, C99 Ctrllr, Vast XT Sensor

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32283

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 10/12/16 CMM, 2007, 39.4"x47.2"x23.6", 2015 Calypso Softw, Vast XT Scan

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32506

Dealer Location

California

Seller is MDNA

Zeiss Contura 776, 2006, 27.6"X27.6"X23.6", Calypso Software, Vast XT Scan, C99 Controller

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32770

Dealer Location

California

Seller is MDNA

Zeiss Contura 10.12.6 w/Rds, 39"x47"x24", Rds, Calypso Software, Probe Change Rack, 2014

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32654

Dealer Location

California

Seller is MDNA

Zeiss Contrua 7.10.6, 700x1000x600mm, DCC Ctrl, VAST XT Probing, PC-DMIS CAD++

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

700

Dealer Location

Ontario

Seller is MDNA

YODER M3 "CEE PURLIN" TOOLED, GEAR DRIVEN ROLL FORMING LINE

Manufacturer

YODER

Type

DETERGENT PRODUCTION LINES

Stock

43019

Dealer Location

Illinois

Seller is MDNA

2013 YANGLI QC12Y-12x3200 Shear

Manufacturer

YANGLI

Type

MISCELLANEOUS

Stock

11550

Dealer Location

Michigan

Seller is MDNA

7250 Lb. Yale Forklift

Manufacturer

YALE

Type

TRUCKS, LIFT, GAS OR ELECTRIC

Stock

6505

Dealer Location

Ohio

15,000 Lb. Yale, Electric

Manufacturer

YALE

Type

TRUCKS, LIFT, GAS OR ELECTRIC

Stock

None

Dealer Location

Ohio

Seller is MDNA

6,000 LB YALE MODEL #A29N01660J ELECTRIC POWER PALLET JACK: STOCK #11542

Manufacturer

YALE

Type

PALLET JACKS, ELECTRIC

Stock

11542

Dealer Location

Ohio

Seller is MDNA

4000# Capacity, 2 Stage Mast, Side Shift, LP Gas, Cushion Tire

Manufacturer

YALE

Type

FORK LIFT TRUCKS

Stock

None

Dealer Location

Wisconsin

Seller is MDNA

8,000 LB YALE DIESEL FORKLIFT: STOCK #70867

Manufacturer

YALE

Type

FORK LIFT TRUCKS

Stock

70867

Dealer Location

Ohio

Seller is MDNA

8,000 LB YALE LP GAS FORKLIFT: STOCK #66562

Manufacturer

YALE

Type

FORK LIFT TRUCKS

Stock

66562

Dealer Location

Ohio

Seller is MDNA

6000 LBS YALE FORKLIFT: STOCK #72713

Manufacturer

YALE

Type

FORK LIFT TRUCKS

Stock

72713

Dealer Location

Ohio

Seller is MDNA

Wysong 10' X 1/4" Shear with Power Back Gauge, Probes, Extra blades and 10' squaring arms

Manufacturer

WYSONG

Type

MISCELLANEOUS

Stock

8173

Dealer Location

Illinois

Seller is MDNA

Wirelab 310 Wire Descaler

Manufacturer

WIRE LAB

Type

MISCELLANEOUS

Stock

6855

Dealer Location

Pennsylvania

Seller is MDNA

1200 SCFM WILEKERSON REFRIGERATED COMPRESSED AIR DRYER: STOCK #64264

Manufacturer

WILKERSON

Type

PARTS DRYERS

Stock

64264

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.

Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |

Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |

STAR SR32, year 2012 or newer, only with gang tooling

Requested by: Kaste Industrial Machine Sales Inc. Phone | (860) 623-5700 Email | mark@kaste.com Interested |

200 Ton Amada 2010+

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Amada EMT Turret 2010+

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Trumpf Model 5000 Fiber or C02 CNC Tube Laser Built in 2010 or newer- TRUMPFS ONLY

Requested by: Kaste Industrial Machine Sales Inc. Phone | (860) 623-5700 Email | mark@kaste.com Interested |