Viewing 10 Results
Manufacturer - CWP
Seller is MDNA

8" X .010"/.093" CWP Parts/Thin Coil Stock, Model #8SPS, 17 Rolls, 240/1200 IPM, STK#774

Manufacturer

CWP

Type

STRAIGHTENERS, FLAT & SHAPE

Stock

774

Dealer Location

Connecticut

Seller is MDNA

12"X .125 CWP MODEL #SE12B STRAIGHTENER: STOCK #72116

Manufacturer

CWP

Type

STRAIGHTENERS, BEAM

Stock

72116

Dealer Location

Ohio

Seller is MDNA

36" WIDE X 30" STROKE CWP MODEL #HF3630RH GRIPPER AIR FEEDER: STOCK #12695

Manufacturer

CWP

Type

SHEET FEEDERS

Stock

12695

Dealer Location

Ohio

Seller is MDNA

24" WIDE X .125" CWP MODEL #24C 7 ROLL POWERED COIL STRAIGHTENER: STOCK #13904

Manufacturer

CWP

Type

REELS, COIL

Stock

13904

Dealer Location

Ohio

Seller is MDNA

4,000 LB X 18" CWP MODEL #3R18 NON MOTORIZED UNCOILER: STOCK #67372

Manufacturer

CWP

Type

REELS, COIL

Stock

67372

Dealer Location

Ohio

Seller is MDNA

12” x .156 CWP SERVO FEEDLINE

Manufacturer

CWP

Type

FEEDERS

Stock

10504

Dealer Location

Wisconsin

Seller is MDNA

USED CWP ROLL POWER STRAIGHTENER, Model 6B7, 6” Width, Stock No. 8901

Manufacturer

CWP

Type

COIL STRAIGHTENERS

Stock

8901

Dealer Location

Michigan

Seller is MDNA

30" Cooper Weymouth Peterson Powered Straightener Model 30C

Manufacturer

CWP

Type

COIL STRAIGHTENERS

Stock

2694

Dealer Location

Michigan

Seller is MDNA

6000 LB X 12" X .135" CWP COIL CRADLE AND STRAIGHTENER: STOCK # 65904

Manufacturer

CWP

Type

COIL CRADLES & STRAIGHTENERS

Stock

65904

Dealer Location

Ohio

Seller is MDNA

8,000 LB X 18" X .187" CWP MODEL #18CCS MOTORIZED COIL CRADLE & 7 ROLL STRAIGHTENER: STOCK 16341

Manufacturer

CWP

Type

COIL CRADLES & STRAIGHTENERS

Stock

16341

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |