Viewing 8 Results
Seller is MDNA

Peddinghaus PCD-1100,44" x 18" cap, (3) Spindle, Meba 1140/510 Saw, Siemens CNC, Conveyor, 2006 #31842

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

31842

Dealer Location

New York

Seller is MDNA

Peddinghaus Ocean Avenger Plus 1250/1C Single Spindle Drill Line, Mfg 2016

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

11372

Dealer Location

New York

Seller is MDNA

Peddinghaus Ocean Avenger 40 Model1000/1C Single Spindle CNC Beam Drill, 60' x 40" Beam, Siemens CNC, New 2020, #32082

Manufacturer

OCEAN

Type

BEAM/DRILL LINES, CNC

Stock

32082

Dealer Location

New York

Seller is MDNA

Franklin HD145 x 44, 44" Capacity, 1-9/16" Drill Capacity, Franklin CNC Ctrl, All electronics Upgraded 2016, #31798

Manufacturer

FRANKLIN

Type

BEAM/DRILL LINES, CNC

Stock

31798

Dealer Location

New York

Seller is MDNA

Ficep Excalibur 12 Single Spindle Drill, 6-ATC, 47" x 47" Max Beam, 25 HP, 50' Table, PC Based CNC, 2019 #32094

Manufacturer

FICEP

Type

BEAM/DRILL LINES, CNC

Stock

32094

Dealer Location

New York

Seller is MDNA

2005 FICEP MODEL #1101DZ STRUCTURAL BEAM DRILL WITH CONVEYOR: STOCK 14431

Manufacturer

FICEP

Type

BEAM/DRILL LINES, CNC

Stock

14431

Dealer Location

Ohio

Seller is MDNA

40" FICEP MODEL #1001PZB STRUCTURAL BEAM DRILL & SAW LINE, NEW 2007: STOCK 16591

Manufacturer

FICEP

Type

BEAM/DRILL LINES, CNC

Stock

16591

Dealer Location

Ohio

Seller is MDNA

3 SPINDLE 40' X 20' DIATO MODEL DNF1050 AUTOMATIC BEAM DRILL: #71473

Manufacturer

None listed

Type

BEAM/DRILL LINES, CNC

Stock

71473

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |