Viewing 5 Results
Seller is MDNA

15" VANTAGE Western Hardware & Specialty MFG MODEL #PD30 MANUAL DRILL PRESS: STOCK #12267

Manufacturer

VANTAGE

Type

DRILL PRESSES

Stock

12267

Dealer Location

Ohio

Seller is MDNA

USED, 24" FOSDICK UPRIGHT DRILL PRESS

Manufacturer

FOSDICK

Type

DRILL PRESSES

Stock

19677

Dealer Location

Texas

Seller is MDNA

USED CINCINNATI 21" SLIDING HEAD FLOOR STANDING DRILL PRESS, MODEL 21, Stock# 10900

Manufacturer

CINCINNATI INC

Type

DRILL PRESSES

Stock

10900

Dealer Location

Michigan

Seller is MDNA

BUFFALO 2-SPINDLE DRILL PRESS: STOCK #12025

Manufacturer

BUFFALO

Type

DRILL PRESSES

Stock

12025

Dealer Location

Ohio

Seller is MDNA

24" LELAND GIFFORD SINGLE SPINDLE DRILL PRESS: STOCK #16677

Manufacturer

None listed

Type

DRILL PRESSES

Stock

16677

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |