Viewing 5 Results
Seller is MDNA

3 TON ALVA ALLEN PNEUMATIC PRESS: STOCK #73561

Manufacturer

None listed

Type

PRESSES, AIR

Stock

73561

Dealer Location

Ohio

Seller is MDNA

60" X 30" 4 POST PNEUMATIC PRESS: STOCK #69325

Manufacturer

None listed

Type

PRESSES, AIR

Stock

69325

Dealer Location

Ohio

Seller is MDNA

1 TON 2-POST AIR PRESS: STOCK #21067

Manufacturer

None listed

Type

PRESSES, AIR

Stock

21067

Dealer Location

Ohio

Seller is MDNA

1 TON 2-POST AIR PRESS: STOCK #21066

Manufacturer

None listed

Type

PRESSES, AIR

Stock

21066

Dealer Location

Ohio

Seller is MDNA

30 Ton Tox Air Press

Manufacturer

TOX

Type

PRESSES, AIR

Stock

5366

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Flame Cutting System, CNC Single Torch, Approx. 5' X 10'

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |