EITEL RP-25 STRAIGHTENING PRESS, ROLLING FIXTURE, 11" X 75" MAIN TABLE, TABLE EXTENSIONS AVAILABLE, RECONDITIONED & READY TO GO!
EITEL
PRESSES, HYDRAULIC, (Straightening)
6554
Michigan
EITEL RP-100 STRAIGHTENING PRESS, RECONDITIONED, ROLLING FIXTURE, 11" X 55" MAIN TABLE, TABLE EXTENSIONS AVAILABLE, READY TO GO!
EITEL
PRESSES, HYDRAULIC, (Straightening)
None
Michigan
Eitel Model RP-40 Hydraulic Straightening Press, New 2013, 44 Ton, Rolling Fixture with 120" Length Capacity, Table Extensions, Measuring Bracket with Indicator, Safety Guarding, Original Paint & Mint Condition!
Eitel
PRESSES, HYDRAULIC, (Straightening)
None
Michigan
400 Ton Tvan Straightening Press
TVAN
PRESSES, HYDRAULIC, (Straightening)
15552
Texas
200 Ton Elmes Hydraulic Straightening Press
ELMES
PRESSES, HYDRAULIC, (Straightening)
7225
Ohio
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Flame Cutting System, CNC Single Torch, Approx. 5' X 10'
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
