Pandjiris 48" Seam Welder, Water Cooled Mandrel & MIG Gun, Miller Feeder, Dual Ft Pdls, Call
PANDJIRIS
SEAMERS
S160702P
Ohio
Pandjiris 4' External Seamer, 54" Total Welding/ Clamping Length Cap, Ready To Be Rebuilt
PANDJIRIS
SEAMERS
S160603
Ohio
Jetline 9629, Carriage Ctrl, 96"Ext Seam Welder,Cold Wire Feeder,Gas Purge Backup Bar,Call
JETLINE
SEAMERS
S170202P
Ohio
Binzel 20' Flat Sheet/Internal/External Weld Seamer, 240" Weld/Clamp Lgth, Flat Sheet Weld
BINZEL
SEAMERS
S140406P
Ohio
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Haas ST-30 Needed
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need Haas VF-3
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Need 2017 or newer 5-8 Axis 250-350 Ton press brake.
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
