Thayer Scale PF-SC-S-4.5 | Loss-In-Weight Screw Feeder

Manufacturer

THAYER SCALE

Category

Miscellaneous Machines

Type

MISCELLANEOUS

Stock

None

Model

PF-SC-S-4.5

Dealer Location

Ohio

Request a Quote
Login to Access Additional Features
View Contact Information

Spec Sheet

Manufacturer - Thayer Scale | Hyer Industries
Model - PF-SC-S-4.5
Serial No. - 1500-0993
Load Cell Model - LC-174
Load Cell Serial No. - 174-1835
Capacity - 1195lbs/hr
Approx Feed Rate Range - 0.14 - 600 (ft³ hr)
Nominal Capacity - 75lbs
Scale Capacity - 30-500lbs
Scale Suspension - Cable System
Load Cell - Strain Gauge
Controls - Thayer Controls S52
Electrical Specs - 3-Phase, 230/460V, 60Hz | XP-Motor on both screw feeder and agitator
Manufacture Date - N/A
Machine Dimensions - 52”W x 56”L x 56”H
Overall Skid Dimensions - 56”W x 65”L x 63”H
Weight - 880lbs (approx.)
Typical Materials Handled - CLAY, POLYETHYLENE PELLETS, LIMESTONE, PIGMENTS, IRON OXIDE, ZINC BORATE, ZINC OXIDE, OSB RESIN, QUICK LIME, STARCH, FLUORSPAR, ZEOLITE
Seller Note: - Unit is NEW | NEVER USED | NEVER PUT INTO PRODUCTION. The shipping struts from the factory can still be seen in the pictures. The scale was never set-up. This unit shows no signs of wear or any residue on the inside of the hopper. As seen in the pictures it is exceptionally clean with no use at all. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. We have tested both the scree feeder and the agitator and both function as intended with no issues noted. Pictures are of the actual unit being purchased in the original location they were in production. Unit is currently at our facility and ready to be inspected if chosen by the buyer. This unit is ready for immediate shipment. Buyer is always welcome to inspect the unit before purchasing at our location.


Thayer Scale PF-SC-S-4.5 

Loss-In-Weight Screw Feeder

Manufacturer:

Thayer Scale  |  Hyer Industries

Model:

PF-SC-S-4.5

Serial No.:

1500-0993

Load Cell Model:

LC-174

Load Cell Serial No.:

174-1835

Capacity:

1195lbs/hr

Approx Feed Rate Range:

0.14 - 600 (ft³ hr)

Nominal Capacity:

75lbs

Scale Capacity:

30-500lbs

Scale Suspension:

Cable System

Load Cell:

Strain Gauge

Controls:

Thayer Controls S52

Electrical Specs:

3-Phase, 230/460V, 60Hz |  XP-Motor on both screw feeder and agitator

Manufacture Date:

N/A

Machine Dimensions:

52”W x 56”L x 56”H

Skid Dimensions:

56”W x 65”L x 63”H

Weight:

880lbs (approx.)

 

 

Typical Materials Handled:

CLAY, POLYETHYLENE PELLETS, LIMESTONE, PIGMENTS, IRON OXIDE, ZINC BORATE, ZINC OXIDE, OSB RESIN, QUICK LIME, STARCH, FLUORSPAR, ZEOLITE

 

 

Seller Note:

Unit is NEW | NEVER USED | NEVER PUT INTO PRODUCTION. The shipping struts from the factory can still be seen in the pictures. The scale was never set-up. This unit shows no signs of wear or any residue on the inside of the hopper. As seen in the pictures it is exceptionally clean with no use at all. Unit is being sold AS-IS, WHERE-IS, AS-SHOWN. We have tested both the scree feeder and the agitator and both function as intended with no issues noted. Pictures are of the actual unit being purchased in the original location they were in production. Unit is currently at our facility and ready to be inspected if chosen by the buyer. This unit is ready for immediate shipment. Buyer is always welcome to inspect the unit before purchasing at our location.

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote