Westbrook Engineering
23501 Mound Rd
Warren Michigan 48393 United States
Phone: (586) 759-3100
Fax: (586) 759-3106
marty@westbrook-eng.com
www.westbrook-eng.com
Westbrook Engineering Listings
USED STAMTEC G1-260 GAP FRAME MECHANICAL PRESS, 286 Tons, Year 2000, Stock No. 10614
STAMTEC
PRESSES, GAP FRAME, (Single Crank)
10614
Michigan
USED TSUNE FULLY AUTOMATIC NON-FERROUS CIRCULAR SAW WITH INCLINE LOADING RACK , Model TK5M90PL,
TSUNE
SAWS, COLD & CARBIDE (Non-ferrous)
10599
Michigan
USED W.F. WELLS SEMI-AUTOMATIC DUAL POST HIGH SPEED BANDSAW MODEL F-16-2, Stock 10598, Year 2006
W.F. WELLS
SAWS, BAND, HORIZONTAL
10598
Michigan
Used AMADA FULLY AUTOMATIC CARBIDE CIRCULAR SAW , Model CM75, 2.95”, Stock No. 10597, Year 2005
AMADA
SAWS, COLD & CARBIDE
10597
Michigan
USED KASTO MODEL HBA-520 AU 20.5" X 20.5" AUTOMATIC HORIZONTAL BANDSAW, STOCK# 10649, YEAR 1997
KASTO
SAWS, BAND, HORIZONTAL
10649
Michigan
USED KASTO MODEL HBA-360 AU 14" x 14" AUTOMATIC HORIZONTAL BANDSAW, STOCK# 10648
KASTO
SAWS, BAND, HORIZONTAL
10648
Michigan
USED FRIGGI MODEL 104FG 500 POWERED TABLE HEAVY DUTY VERTICAL BLOCK & PLATE SAW, YEAR 1999 STOCK
FRIGGI
SAWS, PLATE, VERTICAL BAND
10635
Michigan
USED KUKA 6-AXIS ROBOTIC WELDING SYSTEM MODEL KR-16 W/KR C2 CONTROLLER, Stk# 10870, Year: 2009
KUKA ROBOTICS
ROBOTS, (Including CNC)
10870
Michigan
USED DIVERSITECH 3' X 4' DOWNDRAFT WELDING TABLE Stk# 10871, Year: 2018
DIVERSITECH
DUST COLLECTORS
10871
Michigan
USED LISSMAC DUAL SIDED DEBURRING MACHINE, Stock# 10885, Year: 2014
LISSMAC
GRINDERS, SLAG
10885
Michigan
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Flame Cutting System, CNC Single Torch, Approx. 5' X 10'
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |