Viewing 303 Results
Category - Rolls
Seller is MDNA

30,000 LB WORTHINGTON BPRR 15 TURNING ROLL: STOCK #55924

Manufacturer

WORTHINGTON

Type

ROLLS, POWER TANK TURNING

Stock

55924

Dealer Location

Ohio

Seller is MDNA

10 TON WORTHINGTON TANK TURNING ROLL SET: STOCK #71389

Manufacturer

WORTHINGTON

Type

ROLLS, POWER TANK TURNING

Stock

71389

Dealer Location

Ohio

Seller is MDNA

6' x 1/2" WEBB MODEL #7L MECHANICAL INITIAL PINCH PLATE ROLL: STOCK 13663

Manufacturer

WEBB CORPORATION

Type

ROLLS, PINCH

Stock

13663

Dealer Location

Ohio

Seller is MDNA

6' X 1/2" WEBB MODEL 7L-9006 PLATE ROLL: STOCK 15547

Manufacturer

WEBB CORPORATION

Type

ROLLS, PINCH

Stock

15547

Dealer Location

Ohio

Seller is MDNA

1/2" WEBB MODEL #5 OFF-SET FORMING ROLL WITH SHUTTLE SUPPORT STAND: STOCK #10116

Manufacturer

WEBB CORPORATION

Type

ROLLS, OFFSET

Stock

10116

Dealer Location

Ohio

Seller is MDNA

10 TON / 20,000 LBS WEBB MODEL #T30 POWERED TANK TURNING ROLLS, DRIVE & IDLER SET: STOCK #13557

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13557

Dealer Location

Ohio

Seller is MDNA

15 TON WEBB TANK TURNING ROLLS: STOCK #72674

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

72674

Dealer Location

Ohio

Seller is MDNA

10 TON WEBB TANK TURNING ROLLS: STOCK #70349

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

70349

Dealer Location

Ohio

Seller is MDNA

10 TON WEBB TANK TURNING ROLLS: STOCK #70350

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

70350

Dealer Location

Ohio

Seller is MDNA

8,000 LBS LBS WEBB POWERED TANK TURNING ROLLS: STOCK #13563

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13563

Dealer Location

Ohio

Seller is MDNA

8,000 LBS LBS WEBB POWERED TANK TURNING ROLLS: STOCK #13562

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13562

Dealer Location

Ohio

Seller is MDNA

18,000 LBS WEBB MODEL #T18 POWERED TANK TURNING ROLLS, DRIVE & 2 IDLERS SET: STOCK #13559

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13559

Dealer Location

Ohio

Seller is MDNA

12,000 LBS WEBB MODEL #T18 POWERED TANK TURNING ROLLS, DRIVE & IDLER SET: STOCK #13561

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13561

Dealer Location

Ohio

Seller is MDNA

12,000 LBS WEBB MODEL #T18 POWERED TANK TURNING ROLLS, DRIVE & IDLER SET: STOCK #13560

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13560

Dealer Location

Ohio

Seller is MDNA

12,000 LBS WEBB MODEL #T18 POWERED TANK TURNING ROLLS, DRIVE & IDLER SET: STOCK #13558

Manufacturer

WEBB

Type

ROLLS, POWER TANK TURNING

Stock

13558

Dealer Location

Ohio

Seller is MDNA

50" X 7/8" WEBB MODEL #9L PLATE BENDING ROLL: STOCK #14329

Manufacturer

WEBB

Type

ROLLS, PINCH

Stock

14329

Dealer Location

Ohio

Seller is MDNA

10' X 1-1/8" WEBB MODEL #16L INITIAL PINCH PLATE BENDING ROLL: STOCK #14768

Manufacturer

WEBB

Type

ROLLS, PINCH

Stock

14768

Dealer Location

Ohio

Seller is MDNA

5' x 5/16" WEBB INITIAL PLATE BENDING ROLLS: STOCK #73789

Manufacturer

WEBB

Type

ROLLS, PINCH

Stock

73789

Dealer Location

Ohio

Seller is MDNA

US Industrial 1/4" x 10', 3-Roll Initial Pinch, Hardened Rolls, Cone Rolling, 2018, #31963

Manufacturer

U.S. INDUSTRIAL

Type

ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal)

Stock

31963

Dealer Location

New York

Seller is MDNA

TISHKEN 12" ROLL STRAIGHTENER: STOCK #12959

Manufacturer

TISHKEN

Type

ROLLS, STRAIGHTENING

Stock

12959

Dealer Location

Ohio

Seller is MDNA

200 HP SHAANXI MODEL #H-1000 CROSS WEDGE FORGE ROLL : STOCK #14250

Manufacturer

SHAANXI

Type

ROLLS, FORGING

Stock

14250

Dealer Location

Ohio

Seller is MDNA

10' X 3" Sertom Model 30-603 Plate Bending Machine, w/Roll Tables & Support, Mfg 2011

Manufacturer

SERTOM

Type

ROLLS, PLATE BENDING, INIT & DBL PINCH TYPE, (Incl Sheet Metal)

Stock

11142

Dealer Location

New York

Seller is MDNA

10' x 1.5" SERTOM RIMI 3016 HYDRAULIC PLATE BENDING ROLL: STOCK #13986

Manufacturer

SERTOM

Type

ROLLS, PINCH

Stock

13986

Dealer Location

Ohio

Seller is MDNA

2.5" Sampson Vertical Angle Bending Rolls

Manufacturer

SAMPSON

Type

ROLLS, ANGLE BENDING

Stock

6832

Dealer Location

Ohio

Seller is MDNA

USED ROUNDO 6" X 6" X 5/8" ANGLE BENDING ROLL MODEL R-6-S, Stock# 10929, Year: 2007

Manufacturer

ROUNDO

Type

ROLLS, ANGLE BENDING

Stock

10929

Dealer Location

Michigan

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.

Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |

Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |

Rigger Style Versa Lift Forklift

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

A&M specializes in CNC Swiss, Precision Turning Centers, Ultrasonic Cleaning Systems and General CNC Machinery

Requested by: Automatics & Machinery Phone | 7202046510 Email | steve@automatics.com Interested |

Up to 3” ERW Tube Mill Up to 6” ERW Tube Mill Up to 12” ERW Tube Mill

Requested by: National Machinery Exchange Phone | 19733446100 Email | andreia@nationalmachy.com Interested |

Wanted (2) CNC Surface Grinders – Horizontal Spindle Reciprocating Table machines 16”x40” or 24”x40” ideally would like Chevalier Models SMART-B1640III or SMART -B2440III but will consider comparable.

Requested by: Appraisals for industry Phone | 2032473991 Email | caseymulqueen@gmail.com Interested |