168"/180" Farrel 4-Axis CNC, 2-Rams, ATC, 120" Under Tool, 200 HP, Fanuc Oi-TF, Remanufactured 2019, #30022
Farrel
BORING MILLS, VERTICAL, CNC
30022
New York
168" Farrel, 4-Axis, 2-Rams, ATC, 180" Swing, 120" Under Tool, Fanuc 0i-TF, Remanuf.2019, #30465
FARREL
BORING MILLS, VERTICAL, CNC
30465
New York
96" Farrel 4-Axis, 2-Rams, 110" Swing, 90" U/R, 70 RPM, 75 HP, Fanuc OT #30267
FARREL
BORING MILLS, VERTICAL, CNC
30267
New York
192" Farrel, Double Column, 204" Swing, 72" U/R, 2-Rams, 25 RPM, 125 Ton Cpcty, #24450
FARREL
BORING MILLS, VERTICAL, CNC
24450
New York
72" X 352" Farrel 55/72X352 TWRG, Double Wheel, Belt Grinding, Swim Drive, 1985, #18551
FARREL
GRINDERS, ROLL
18551
New York
192" Farrel, Dbl Col, 202"Swg, 110"U/R, 2-Rams, 35 RPM, 96" Ram Tvl, Rebuilt '10, #27803
FARREL
BORING MILLS, VERTICAL, CNC
27803
New York
192" Farrel 4-Axis CNC, Dbl Col, 252"Swg, 144"U/R, G&L 8000B CNC Ctrl, Retro 1992 #25661
FARREL
BORING MILLS, VERTICAL, CNC
25661
New York
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Flame Cutting System, CNC Single Torch, Approx. 5' X 10'
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
