Viewing 8 Results
Seller is MDNA

1200 CFM, 125 PSI, Zeks No. 1200HSDA40G, 5 HP, Thermal Mass Cycling, 1994

Manufacturer

ZEKA

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

None

Dealer Location

Florida

Seller is MDNA

Speedaire Air Dryer

Manufacturer

SPEEDAIRE

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

6861

Dealer Location

Pennsylvania

Seller is MDNA

280 CFM, Polar/Eaton Model PDR4600280 Non-Cycling Refrigerated Air Dryer

Manufacturer

POLAR/EATON

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

4679

Dealer Location

Michigan

Seller is MDNA

Kaeser 500 cfm Model KRD 500, Non-Cycling Refrigerated Air Dryer

Manufacturer

KAESER

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

17150

Dealer Location

Michigan

Seller is MDNA

3000 CFM, Kaeser Refrigerated Air Dryer

Manufacturer

KAESER

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

4677

Dealer Location

Michigan

Seller is MDNA

HE Systems 75A Air Dryer

Manufacturer

HE SYSTEMS

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

6787

Dealer Location

Ohio

Seller is MDNA

General Pneumatics 1000 cfm Non-Cycling Refrigerated air dryer

Manufacturer

GENERAL PNEUMATICS

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

17152

Dealer Location

Michigan

Seller is MDNA

Champion Centurion II Model VRV5-8 Reciprocating Air Compressor w/ ZEKS Dryer

Manufacturer

CHAMPION

Type

AIR COMPRESSORS, DRYERS, (Refrigerated)

Stock

4229

Dealer Location

Massachusetts

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |