Viewing 71 Results
Seller is MDNA

Zeiss Spectrum 700 Coordinate Measuring Machine CMM, 27.5" X 27.5" X 22.8"

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

4662

Dealer Location

Michigan

Seller is MDNA

Zeiss Prismo 9.12.7, 35"x47"x27", Vast XT Scan Hd, Probe Chg Rack, C99 Ctrllr, Calypso 5.4

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32635

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 7.7.6 Aktiv, 27.6"x27.6"x23.6", Calypso 5.2.18.01, C99 Ctrllr, Vast XT Sensor

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32283

Dealer Location

California

Seller is MDNA

Zeiss Contura G2 10/12/16 CMM, 2007, 39.4"x47.2"x23.6", 2015 Calypso Softw, Vast XT Scan

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32506

Dealer Location

California

Seller is MDNA

Zeiss Contura 776, 2006, 27.6"X27.6"X23.6", Calypso Software, Vast XT Scan, C99 Controller

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32770

Dealer Location

California

Seller is MDNA

Zeiss Contura 10.12.6 w/Rds, 39"x47"x24", Rds, Calypso Software, Probe Change Rack, 2014

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32654

Dealer Location

California

Seller is MDNA

Zeiss Contrua 7.10.6, 700x1000x600mm, DCC Ctrl, VAST XT Probing, PC-DMIS CAD++

Manufacturer

ZEISS

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

700

Dealer Location

Ontario

Seller is MDNA

Wenzel XO 10.20.7, 1000x2000x700mm, WPC 2040 Ctrl, Renishaw PH10T/TP20, CMM Manager/Polyworks

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

691

Dealer Location

Ontario

Seller is MDNA

Wenzel RS Horizontal Arm, 3000x1200x1500mm, B3C-LC Ctrl, Renishaw PH10M/TP20, PC-DMIS CAD++

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

693

Dealer Location

Ontario

Seller is MDNA

Wenzel LH108 3-D CMM, 40"x120"x32", UCC2 Ctrllr, SPA2-2 Amp, MCU5, Revo Probe Hd, '12

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32663

Dealer Location

California

Seller is MDNA

Wenzel LH108 3-D CMM, 40"x120"x32", Ren UCC2 Ctrl, SPA2-2 Amplifier, MCU5 Hand Ctrl

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32663

Dealer Location

California

Seller is MDNA

Wenzel LH108, 1000x3000x800mm, Renishaw Ctrl, Renishaw Revo Probing, Open DMIS

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

579

Dealer Location

Ontario

Seller is MDNA

800x1500x700mm, Renishaw PH10/TP20/SP25, CMM Manager or Polyworks Inspector

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

712

Dealer Location

Ontario

Seller is MDNA

Wenzel LH65, 650x1000x500mm, Renishaw PH10T/TP20, PC-DMIS CAD++ 2011, WPC2030 Ctrl

Manufacturer

Wenzel

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

692

Dealer Location

Ontario

Seller is MDNA

Wenzel LH 128, 1200x1600x800mm, Renishaw UCC S5 Ctrl, Renishaw REVO-2 Probe Head, MODUS

Manufacturer

WENZEL

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

707

Dealer Location

Ontario

Tesa Micro-Hite 3D Coordinate Measuring Machine

Manufacturer

TESA

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

13869

Dealer Location

Michigan

Seller is MDNA

TESA Micro Hite 3D 474 Coordinate Measuring Machine For Sale - 2014

Manufacturer

TESA

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

13869

Dealer Location

Michigan

Seller is MDNA

Sheffield Endeavor 9.9.7, 914x914x660mm, Renishaw PH10MQ, Software

Manufacturer

SHEFFIELD

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

665

Dealer Location

Ontario

Seller is MDNA

USED POLI GLOBO COORDINATE MANUAL MEASURING MACHINE, Stock No. 10616

Manufacturer

POLI

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

10616

Dealer Location

Michigan

Seller is MDNA

Nikon Altera 15.12.10, 1200x1500x1000mm, DCC Ctrl, Renishaw PH10MQ, CMM Manager

Manufacturer

NIKON

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

699

Dealer Location

Ontario

Seller is MDNA

Mitutoyo Strato-Apex Bright 710 Ultra Hi Accuracy CMM, 28x39x24", PH10M Probe, TP200, '07

Manufacturer

MITUTOYO

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32781

Dealer Location

California

Seller is MDNA

Mitutoyo Crysta-Apex S 12/30/10, 47"x118"x39.3", Mcosmos 3.5 Softw, Ren PH10MQ, 2013

Manufacturer

MITUTOYO

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32773

Dealer Location

California

Seller is MDNA

Mitutoyo Crysta Apex S 7106, MCosmos 3 V4, PH-10MQ/SP25

Manufacturer

Mitutoyo

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

40386

Dealer Location

California

Seller is MDNA

MITUTOYO Crysta Apex CRT-A916 Coordinate Measuring Machine, X-35", Y-39", Z-23", 46" B.C, Renishaw PH10MQ Probe, #30029

Manufacturer

MITUTOYO

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

30029

Dealer Location

New York

Seller is MDNA

Mitutoyo Bright Strato 707, '06, 28"x28"x24", Ren PH10M, Probe Chg Rack, PH1C10-2, TP20

Manufacturer

MITUTOYO

Type

COORDINATE MEASURING MACHINES, (Including CNC)

Stock

32641

Dealer Location

California

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |