Viewing 10 Results
Seller is MDNA

25 KW RADYNE VERSAPOWER 25 INDUCTION POWER SUPPLY & INDUCTON HEATER: STOCK #16428

Manufacturer

RADYNE

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

16428

Dealer Location

Ohio

Seller is MDNA

500 KW AJAX TOCCO PACER 1 BILLET INDUCTION HEATER: STOCK #14409

Manufacturer

AJAX TOCCO

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

14409

Dealer Location

Ohio

Seller is MDNA

150 KW TOCCO "INDUCTRON II" INDUCTION HEATER SYSTEM: STOCK #14504

Manufacturer

AJAX TOCCO

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

14504

Dealer Location

Ohio

Seller is MDNA

250 KW AJAX TOCCO "PACER" INDUCTION HARDENING SCANNER SYSTEM WITH MAGNESCAN QS CONTROLS: STOCK #

Manufacturer

AJAX

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

16063

Dealer Location

Ohio

Seller is MDNA

650 DEGREES TRENT DIE HEATER: STOCK #62792

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

62792

Dealer Location

Ohio

Seller is MDNA

10 KW LEPEL INDUCTION HEATER: STOCK #13683

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

13683

Dealer Location

Ohio

Seller is MDNA

TOCCO INDUCTION HEATER TEMPERING LINE: STOCK #65770

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

65770

Dealer Location

Ohio

Seller is MDNA

OMEGA INDUCTION HEATER: STOCK #56387

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

56387

Dealer Location

Ohio

Seller is MDNA

INDUCTION HEATER: STOCK #51993

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

51993

Dealer Location

Ohio

Seller is MDNA

125 KW IPE STATIPOWER MODEL SP-129 BILLET INDUCTION HEATER SYSTEM : STOCK #14505

Manufacturer

None listed

Type

INDUCTION HEATERS (Bar Cutoff Slugs)

Stock

14505

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |