Prestige Equipment Corp.- Terry
35 Pinelawn Road #203W
Melville New York 11747-3111 United States
Phone: (631) 249-5566
Fax: (631) 249-9494
terry@prestigeequipment.com
www.prestigeequipment.com
Prestige Equipment Corp.- Terry Listings
42" X 118" Takang Lathe, 14" Bore, 30" Front/Rear Chucks, Taper, Threading, 2013, #22661
TAKANG
LATHES, OIL FIELD & HOLLOW SPINDLE
22661
New York
Mazak Integrex E1060V,5-Axis,X-73.8",Y-41.7",160 ATC,2APC,Spdl 10K RPM,Table 500 RPM, Mazatrol PC Fusion 640M CNC #31946
MAZAK
BORING MILLS, VERTICAL, CNC
31946
New York
Universal Milling Head, Yang, #50 Taper, Swivel 2 X 360 Deg., New #23779
None listed
TOOLING & ACCESSORIES
23779
New York
AWEA LP-6525YZ 5-Face, X-256", Y-126", 236" x 94" Tbl., 106" B/C, Fanuc 18i CNC, 60 ATC, 90 Deg. Head, #31197
AWEA
MACHINING CENTERS, VERTICAL, CNC, BRIDGE TYPE
31197
New York
48" X 60" Giddings & Lewis Hydrostatic Lift, 4-Pos Shot Pin, Air Clamp, '78 #23419
GIDDINGS & LEWIS
TABLES, ROTARY
23419
New York
120" x 27.75" x 71.75" T-Slotted Angle Plates, 12" Centers, 1" x 1.75" T-Slot Dimension, Qty. 2, #32106
None listed
ANGLE PLATES
32106
New York
8" Ingersoll Ram Type, X-600", Y-264", Z-48", W-48", 100 HP, Angle Head, Rotary Table, Siemens 840D, #31817
INGERSOLL
BORING MILLS, HORIZONTAL, FLOOR TYPE, CNC
31817
New York
78" X 108" Skoda E-20, Infeeding, 119" Travel, 20 Ton Weight Cap, '63 #18028
SKODA
TABLES, ROTARY
18028
New York
72" X 72" Giddings & Lewis 360P CNC Infeeding, 44,000 Lb. Cap., 48" Infeed, '01, #19686
GIDDINGS & LEWIS
TABLES, ROTARY
19686
New York
80" X 118" Tru Turn, 2040/3M, 64" OCS, 315 RPM, 15 Ton, Stdy Rests, in/mm, 40HP, #22715
TRU TURN
LATHES, ENGINE
22715
New York
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
Haas ST-30 Needed
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need Haas VF-3
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need 2017 or newer 5-8 Axis 250-350 Ton press brake.
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.
Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |
Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |
PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.
Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |
STAR SR32, year 2012 or newer, only with gang tooling
Requested by: Kaste Industrial Machine Sales Inc. Phone | (860) 623-5700 Email | mark@kaste.com Interested |
200 Ton Amada 2010+
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Amada EMT Turret 2010+
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Trumpf Model 5000 Fiber or C02 CNC Tube Laser Built in 2010 or newer- TRUMPFS ONLY
Requested by: Kaste Industrial Machine Sales Inc. Phone | (860) 623-5700 Email | mark@kaste.com Interested |