Viewing 11 Results
Manufacturer - ACCURPRESS
Seller is MDNA

ACCURPRESS 7606 60 TON HYDRAULIC PRESS BRAKE

Manufacturer

ACCURPRESS

Type

PRESSES, MECHANICAL

Stock

43101

Dealer Location

Illinois

Seller is MDNA

ACCURPRESS 515012 150 TON 8-AXIS CNC HYDRAULIC PRESS BRAKE

Manufacturer

ACCURPRESS

Type

PRESSES, MECHANICAL

Stock

42107

Dealer Location

Illinois

Seller is MDNA

Accurpress 710010 100 Ton x 10′ Hydraulic Press Brake w/ Autogauge CNC1000 Back Gauge

Manufacturer

ACCURPRESS

Type

BRAKES, PRESS, PNEUMATIC

Stock

SB-220002

Dealer Location

Georgia

Seller is MDNA

100 Ton Accurpress 7-100-12, 3-Axis CNC, '00, 8"Str, 14"Open Ht,ETS3000 Ctrl,BG,Ft Switch

Manufacturer

ACCURPRESS

Type

BRAKES, PRESS, HYDRAULIC (Inch/Ton)

Stock

32413

Dealer Location

California

Seller is MDNA

250 TON X 12' ACCURPRESS ADVANTAGE 725012, ETS-3000,MFG:2007

Manufacturer

ACCURPRESS

Type

BRAKES, PRESS, CNC, (Including Hyd/Mech)

Stock

11577

Dealer Location

New York

Seller is MDNA

50 Ton Accurpress 750.6 Hydraulic Press Brake, 6'

Manufacturer

ACCURPRESS

Type

BRAKES, PRESS, CNC, (Including Hyd/Mech)

Stock

6950

Dealer Location

Ohio

Seller is MDNA

1997 Accurpress 7250212, 12' x 250 Ton, 2 Axis CNC Hydraulic Press Brake

Manufacturer

Accurpress

Type

BRAKES, PRESS, CNC, (Including Hyd/Mech)

Stock

17113

Dealer Location

North Carolina

Seller is MDNA

130 TON X 12' ACCURPRESS 713012 HYDRAULIC PRESS BRAKE W/UPGRADED ETS 3000 CONTROL MFG:2000

Manufacturer

ACCURPRESS

Type

BRAKES, PRESS, CNC, (Including Hyd/Mech)

Stock

11695

Dealer Location

New York

Seller is MDNA

16' (192") ACUTE BOTTOM PRESS BRAKE DIE: STOCK 13030

Manufacturer

ACCURPRESS

Type

Brakes, Parts, Tooling & Accessories

Stock

13030

Dealer Location

Ohio

Seller is MDNA

60 TON X 10' ACCURPRESS HYDRAULIC PRESS BRAKE: STOCK #73455

Manufacturer

ACCURPRESS

Type

AIR COMPRESSOR ACCESSORIES

Stock

73455

Dealer Location

Ohio

Seller is MDNA

60 TON X 8' ACCURPRESS CNC HYDRAULIC PRESS BRAKE: STOCK #62296

Manufacturer

ACCURPRESS

Type

AIR COMPRESSOR ACCESSORIES

Stock

62296

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.

Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |

Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |

Rigger Style Versa Lift Forklift

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

A&M specializes in CNC Swiss, Precision Turning Centers, Ultrasonic Cleaning Systems and General CNC Machinery

Requested by: Automatics & Machinery Phone | 7202046510 Email | steve@automatics.com Interested |

Up to 3” ERW Tube Mill Up to 6” ERW Tube Mill Up to 12” ERW Tube Mill

Requested by: National Machinery Exchange Phone | 19733446100 Email | andreia@nationalmachy.com Interested |

Wanted (2) CNC Surface Grinders – Horizontal Spindle Reciprocating Table machines 16”x40” or 24”x40” ideally would like Chevalier Models SMART-B1640III or SMART -B2440III but will consider comparable.

Requested by: Appraisals for industry Phone | 2032473991 Email | caseymulqueen@gmail.com Interested |