For Sale CARLTON Surplus Machine Tool Inventory

Wanted Machine

View all >

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

Requested by: Prime Machinery Phone | 5169227977 Email | sales@primemach.com Interested |

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

Requested by: Basic Crating and Packaging Phone | 6302771945 Email | jimmy@basiccrating.com Interested |

ANY CAPACITY Forklift Later Model, Low Hours

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

4FS OR 4FSA FENN STATIONARY DIE SWAGER

Requested by: Machinery International Corp. Phone | (203) 484-0400 Email | sales@machyintl.com Interested |

Looking for a 25" Pallet Horizontal Machining Center located in Southwest, USA. Japanese or Korean Manufacturer ONLY Gerson@machinerynetwork.com

Requested by: Machinery Network Auctions Phone | (818) 465-6700 Email | info@machinerynetworkauctions.com Interested |

PAYOFF/UNCOILER 500#, 12" WIDE MATERIAL, 14" ID, NON POWERED, PREFER CONNECTICUT AREA

Requested by: Machinery International Corp. Phone | (203) 484-0400 Email | sales@machyintl.com Interested |

Wanted Machine

Coordinate Measuring Machines, All Types

Water Jet Equipment, Any

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

CNC Machines, Any

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Planer Mills, Openside Preferred, X-200" or More

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Haas ST-30 Needed

Need Haas VF-3

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Interested in a Mitsubishi MV1200 or MV2400 Wire EDM.

Heavy duty CNC Lathe 48” x 250”, Fanuc Control Preferred, Immediate purchase

PALLET RACKING NEEDED - Qty. 470 - Crossbeams, 4” – 6” thick, 8’ Long or 10 Feet / Qty. 245 - Up Rights - 42” x 20-22’, Weight Cap: 5000 lbs.

ANY CAPACITY Forklift Later Model, Low Hours

4FS OR 4FSA FENN STATIONARY DIE SWAGER

Looking for a 25" Pallet Horizontal Machining Center located in Southwest, USA. Japanese or Korean Manufacturer ONLY Gerson@machinerynetwork.com

PAYOFF/UNCOILER 500#, 12" WIDE MATERIAL, 14" ID, NON POWERED, PREFER CONNECTICUT AREA