HNK NT-16/20, 63" Tbl, 12-ATC, 78" Turn Dia., 63" Turn Height, 4-Jaw, Coolant, 60 HP, Fanuc 18i-TB, 2007, #31487
HNK
BORING MILLS, VERTICAL, CNC
31487
New York
HNK HB-150, 5.9" Spdl, X-118", Y-90.5", Z-63", W-27.6", 78" x 86" Tbl, 2000 RPM, 40-ATC, Fanuc 31iA CNC, 2011, #31481
HNK
BORING MILLS, HORIZONTAL, TABLE TYPE, CNC
31481
New York
HNK HB-130CX, 5.12" Spindle, X-157", Y-90", Z-27.5", W-63", 157" x 63" Tbl, 2500 RPM, 60 ATC, Fanuc 18iMB, 2011, #31533
HNK
BORING MILLS, HORIZONTAL, TABLE TYPE, CNC
31533
New York
78" HNK VTC-2025, 12-ATC, Live Spindle, C-Axis, TSC, 98" Turning Dia., 71" Height, 75 HP, Fanuc 31i, 2019 #31453
HNK
BORING MILLS, VERTICAL, CNC
31453
New York
HNK VTC30/40 CNC Vertical Boring Mill with Milling
HNK
BORING MILLS, VERTICAL, CNC
31495
New York
5.9" HNK HB-150X, 60 ATC, X-118", Y-98" B-Axis Rotary Table, 44,000 lb Wt Cap, Fanuc 18i, 2012 #31280
HNK
BORING MILLS, HORIZONTAL, TABLE TYPE, CNC
31280
New York
HNK HB-130, 5.1" Spindle, X-118", Y-90.5", Z-27.5", W-51", 63" x 70", 2500 RPM, 60-ATC, CTS, Fanuc 31iA CNC, 2013, #30933
HNK
BORING MILLS, HORIZONTAL, TABLE TYPE, CNC
30933
New York
78"/98" HNK NT-20/25, 12-ATC, 98" Turn Diam., 70" Turn Height, 4-Jaw, Coolant, 60 HP, '11 #30380
HNK
BORING MILLS, VERTICAL, CNC
30380
New York
63"/78" HNK NT-16/20, 12-ATC, 78" Turn Diam., 63" Turn Height, 4-Jaw, Coolant, '07 #30379
HNK
BORING MILLS, VERTICAL, CNC
30379
New York
59" X 472" HNK HL-15X, 59.05" Swing, Fanuc 18i-TB, 50 Ton Cap, Chip Conv, 126 HP, #26013
HNK
LATHES, ENGINE
26013
New York
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Flame Cutting System, CNC Single Torch, Approx. 5' X 10'
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
