Wila New Standard Press Brake Dies & Tooling, (2) Cabinets #30377
Wila
TOOLING & ACCESSORIES
30377
New York
Yang Right Angle Head, #50 Taper, 2000 RPM, 38 Kw, New #29567
YANG
TOOLING & ACCESSORIES
29567
New York
Poreba Boring Tailstock From TR-135B, 5" Bar Diam., 32" Power Quill Stroke Rapid, '81 #29445
POREBA
TOOLING & ACCESSORIES
29445
New York
Levelling Jacks for Floor Plates, 7"W x 11.5"L x 5.75"H, 1.25" Bolt Hole, #29031
Unknown
TOOLING & ACCESSORIES
29031
New York
Futurmill DT-8-18-30, 53-900 RPM, NMTB #50 Taper, 7" Quill Dia., 8" Travel #29187
FUTURMILL
TOOLING & ACCESSORIES
29187
New York
Hanel Rotomat 990 Storage System, (3) 26-Shelf Units, 27" H x 5'6" D x 11'2" W , 1997/98 #30354
HANEL STORAGE
TOOLING & ACCESSORIES
30354
New York
Right Angle Head, 28" Length Reach, 50 Taper, .625"" Bolt Holes (From TOS 100A) #29339
UNKNOWN
TOOLING & ACCESSORIES
29339
New York
(4) Chuck Jaws, 10" Long, 8.75" Wide, 6.5" High, 3/4" Holes, Keyed, Risers #30206
GIDDINGS & LEWIS
TOOLING & ACCESSORIES
30206
New York
Assorted CAT 50 Tool Holders, Approx. 140 Available, #30343
Unknown
TOOLING & ACCESSORIES
30343
New York
BT 50 Tool Holders, 350 Available #30236
None listed
TOOLING & ACCESSORIES
30236
New York
Giddings & Lewis Model "a" Right Angle Milling Attachment, #30342
GIDDINGS & LEWIS
TOOLING & ACCESSORIES
30342
New York
(4) 9" x 7" x 7.5" Nobel BM-4T Box Chuck Jaws, Matched, #30328
NOBEL
TOOLING & ACCESSORIES
30328
New York
Tos SP100/800 & SP100-500 Spindle Support Attachment, #30226
TOS
TOOLING & ACCESSORIES
30226
New York
(4) Chuck Jaws, 13" Long, 11" Wide, 8.75" High, 1.25" Holes, Keyed, #30192
Unknown
TOOLING & ACCESSORIES
30192
New York
(4) Chuck Jaws, 13" Long, 11" Wide, 8.75" High, 1.25" Holes, Keyed, #30191
Unknown
TOOLING & ACCESSORIES
30191
New York
Used 2004 Maier Swiss ML 20 C2 With Fanuc Controller
Maier
BORING SPINDLES
None
Pennsylvania
Chuck Jaws, (4), 12" Long, 9" Wide, 7.5" High, 3/4" Holes, Keyed, Risers, #30190
None listed
TOOLING & ACCESSORIES
30190
New York
Chuck Jaws, (4), 11.5" Long, 4.375" Wide, 6.75" High, 1" Holes, Keyed, #30189
None listed
TOOLING & ACCESSORIES
30189
New York
Chuck Jaws, (4), 12.25" Long, 5.5" Wide, 6.75" High, 3/4" Holes, Keyed, #30188
None listed
TOOLING & ACCESSORIES
30188
New York
Spindle Support, TOS SP100/800 & SP100-500 Spindle Support Attachment, #30226
None listed
TOOLING & ACCESSORIES
30226
New York
Right Angle Milling Head Attachment, TOS FP40-100, #30225
None listed
TOOLING & ACCESSORIES
30225
New York
Angle Plates, Each 96"H X 21"W X 32"D, Mounting Face Is A Grid of Drilled & Tapped Holes
None listed
TOOLING & ACCESSORIES
ET-5354
Michigan
Angle Plates, (2) 39" X 78" X 39" Cast Iron T-Slotted Angle Plates, 8 T-Slots, #29141
None listed
TOOLING & ACCESSORIES
29141
New York
Four-Way Die, 12' Lower Die Holder, Openings 3/4", 1", 1.5", 2", #29098
None listed
TOOLING & ACCESSORIES
29098
New York
Angle Plates, 127" X 26" X 47" T-Slotted Angle Plates, Cast Iron, #28971
None listed
TOOLING & ACCESSORIES
28971
New York
Wanted Machine
HLV-H-EM Hardinge Precision Lathe. This model only. Must be wired for 3/60/480 volt operation
Requested by: Adams Machinery Co. Phone | (847) 673-0556 Email | adams@adamsmachinery.com Interested |
