Prestige Equipment Corp.- Paul

Wanted Machine

View all >

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Prestige Equipment Corp.- Paul Listings

HP Jet Fusion 4210 3D Printer & Processing Station, 15" x 11.2" x 15" Build Volume, .003" Layer Thickness, 2018, #31558

66" Campbell G22, 4-Axis CNC, 82" Swing,48" UR, (2) Spindles, 3600 RPM, 1983 #21954

LK G80, X-323", Y-138", Z-101", 2-Granite Work Transfer Stations, Probe, New 1995, #15877

Microcut VMC-2100, X-82", Y-35", Z-33", Fanuc 31i, 32 ATC, TSC, New 2021, #21986

Niigata HN63D CNC 4-Axis, X-39", Y-33.5", Fanuc 30iA,(2) 24.8" B-Axis Pallets, 90 ATC, 1000 PSI TSC, Probe, 2010, #31635

No. 96H Gould & Eberhardt, 1.5 DP, 98"Dia, 78"Table, Chip Conveyor, Change Gears, #19028

No. SH450/500S Maag, 21"/206" Min/Max Dia, 68"Tbl, 138"&186" Sub Tbls, ID Attach, #20852

20" Landis Pip Cut Off Machine, 10" - 20" Capacity, 2.9 - 8.5 RPM, 30" Carriage Travel, 25 HP, #28467

CUDA Washer, H20-3636, 36" Rotary Table, 36" Work Height, Wash & Heat Cycles, Oil Skimmer, SN1003444, #32040

Okuma MCR-B III 30/50,5-Face, OSP-P300 CNC, 120" Btw Columns, X-189", Y-146", Z-32", W-51", 72 ATC, 4 AAC, 2013, #30748

Wanted Machine

Coordinate Measuring Machines, All Types

Water Jet Equipment, Any

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

CNC Machines, Any

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Planer Mills, Openside Preferred, X-200" or More

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Haas ST-30 Needed

Need Haas VF-3

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.