Viewing 21 Results
Manufacturer - PEDDINGHAUS
Seller is MDNA

PEDDINGHAUS FPB-1800 CNC PLATE PUNCH & PLASMA

Manufacturer

PEDDINGHAUS

Type

PLASMA CUTTERS

Stock

42497

Dealer Location

Illinois

Seller is MDNA

Peddinghaus HSFDB 2500/B Plate Processor, 3" Plate, 96" Max. Plate Width, HPR400XD Plasma, Drill, Oxy, 2012 #31687

Manufacturer

PEDDINGHAUS

Type

AIR COMPRESSOR ACCESSORIES

Stock

31687

Dealer Location

New York

Seller is MDNA

Peddinghaus PCD-1100/3C-ATC Advantage 2, 3-Spindle, ATC, 2250 RPM, Siemens CNC, 2010 #31703

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

31703

Dealer Location

New York

Seller is MDNA

Peddinghaus 643O 6" x 6" x 5/8" CNC "Anglemaster", Siemens CNC, Double Punch, 40' Conveyor, 2008, #31680

Manufacturer

PEDDINGHAUS

Type

PUNCHES, ANGLE

Stock

31680

Dealer Location

New York

Seller is MDNA

100' Conveyor From Peddinghaus Drill, 30" High, 42" Wide, 300 Lb./Ft. Capacity, #31663

Manufacturer

PEDDINGHAUS

Type

CONVEYORS, ROLLER

Stock

31663

Dealer Location

New York

Seller is MDNA

Peddinghaus HSFDB 2500/B Plate Processor, 3" Plate, 96" Max. Plate Width, HPR400XD Plasma, Drill, Oxy, 2015 #31660

Manufacturer

PEDDINGHAUS

Type

FLAME CUTTING EQUIPMENT, CNC

Stock

31660

Dealer Location

New York

Seller is MDNA

Peddinghaus ABCM-1250A Beam Coping Line, 50" x 24" max. profile, Fagor 8055 Retrofit, #31655

Manufacturer

PEDDINGHAUS

Type

BEAM COPING MACHINES

Stock

31655

Dealer Location

New York

Seller is MDNA

Peddinghaus PCD-1100, 44" x 18" Cap., (3) Spindle, 13.5HP Spindle Motor, Siemens 840D CNC, 2006, #31654

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

31654

Dealer Location

New York

Seller is MDNA

Peddinghaus Ocean Liberator SACM-1250/A, 44" x 24" Max. Profile, 5-Axis Cutting Torch, Siemens CNC, 2014 #31540

Manufacturer

PEDDINGHAUS

Type

BEAM COPING MACHINES

Stock

31540

Dealer Location

New York

Seller is MDNA

Peddinghaus PCD-1100,44" x 18" cap, (3) Spindle, Meba 1100DG Miter Saw , Siemens CNC, Conveyor & Transfers, 2007 #31515

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

31515

Dealer Location

New York

Seller is MDNA

Peddinghaus FPB 1500/3D CNC Plate Punch With 200 AMP Plasma Cutting Torch

Manufacturer

PEDDINGHAUS

Type

PUNCHES, SINGLE END, CNC

Stock

31514

Dealer Location

New York

Seller is MDNA

PEDDINGHAUS MODEL #PERFEKT#55 REBAR BENDER: STOCK #72406

Manufacturer

PEDDINGHAUS

Type

BENDERS, REBAR

Stock

72406

Dealer Location

Ohio

Seller is MDNA

66 TON PEDDINGHAUS MODEL 210 SUPER 13 IRONWORKER: STOCK #66794

Manufacturer

PEDDINGHAUS

Type

IRONWORKERS

Stock

66794

Dealer Location

Ohio

Seller is MDNA

20" X 1.25" Peddinghaus # FPB-500 CNC Plasma/Plate Punch: STOCK #10378

Manufacturer

PEDDINGHAUS

Type

PUNCHES, PLASMA, CNC

Stock

10378

Dealer Location

Ohio

Seller is MDNA

100 TON PEDDINGHAUS SINGLE END MECHANICAL PUNCH: STOCK #12191

Manufacturer

PEDDINGHAUS

Type

PUNCHES, SINGLE END, CNC

Stock

12191

Dealer Location

Ohio

Seller is MDNA

PEDDINGHAUS BAR SHEAR PARTS: STOCK 12941

Manufacturer

PEDDINGHAUS

Type

SHEARS, BAR & BILLET

Stock

12941

Dealer Location

Ohio

Seller is MDNA

2004 PEDDINGHAUS MODEL #BDL-760 BEAM DRILL LINE WITH MODEL #SHN30-16 HORIZONTAL SAW: STOCK 13891

Manufacturer

PEDDINGHAUS

Type

BEAM COPING MACHINES

Stock

13891

Dealer Location

Ohio

Seller is MDNA

Peddinghaus FPB-500/3C, 150 Ton Triple Gag Punch, 20.8" x 40' Plate, 200 Amp Plasma, Control & Drive Upgrade '09 #30803

Manufacturer

PEDDINGHAUS

Type

PUNCHES, SINGLE END, CNC

Stock

30803

Dealer Location

New York

Equipped with Angle (L1):, 3 " Angle (L2):,3 " Angle (T):,0.3125 ", Tonnage:35 T Description, Assorted Dies

Manufacturer

PEDDINGHAUS

Type

MACHINING CENTERS, VERTICAL, CNC (Incl. Pallet Changers)

Stock

Ez12279

Dealer Location

California

Seller is MDNA

Peddinghaus Ocean Avenger Plus 1250/1C Single Spindle Drill Line, Mfg 2016

Manufacturer

PEDDINGHAUS

Type

BEAM/DRILL LINES, CNC

Stock

11372

Dealer Location

New York

Seller is MDNA

Peddinghaus 210 Super 16, 88 Ton Mechanical Iron Worker, '80

Manufacturer

PEDDINGHAUS

Type

PUNCH-SHEARS, IRONWORKERS

Stock

4680

Dealer Location

Michigan

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Bridge Cranes, 62' Span 50 Ton & 64' Span 50 Ton Hot Metal Bridge Cranes

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Machining Centers, Vertical, CNC, 60" X 120" Bridge Mill w/60" Under Bridge

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Lathe, We Have A Customer Looking For A Railroad Wheel Set Lathe

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Flame Cutting System, CNC Single Torch, Approx. 5' X 10'

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Bridge Type Machining Center, Large, Used, 3000mm X 6000mm Table, 7250X, 4200Y, 800Z

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Requested by: FL Sales, Inc. Phone | (440) 498-8484 Email | jgreene@flsales.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |