Viewing 21 Results
Seller is MDNA

USED, 35" X 177" WEILER MODEL E90 CNC HOLLOW SPINDLE LATHE WITH 14" SPINDLE BORE

Manufacturer

WEILER

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19512

Dealer Location

Texas

Seller is MDNA

42" X 118" Takang Lathe, 14" Bore, 30" Front/Rear Chucks, Taper, Threading, 2013, #22661

Manufacturer

TAKANG

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

22661

Dealer Location

New York

Seller is MDNA

36" X 400" Summit Hollow Spindle Engine Lathe

Manufacturer

SUMMIT

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

18815

Dealer Location

Texas

Seller is MDNA

40" X 236" Spark Oil Country, 14" Hole, Front & Rear Chucks, 315 RPM, Tpr, in/mm, #27489

Manufacturer

SPARK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

27489

Dealer Location

New York

Seller is MDNA

40" X 236" Spark Oil Country, 11" Hole, Front & Rear Chks, 315 RPM, Tpr, in/mm, '13 #22723

Manufacturer

SPARK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

22723

Dealer Location

New York

Seller is MDNA

40" X 118" Spark Oil Country, 11" Hole, Front & Rear Chks, 315 RPM, Tpr, in/mm, '13 #22722

Manufacturer

SPARK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

22722

Dealer Location

New York

Seller is MDNA

40" X 118" Spark Oil Country, 14" Hole, Inch/Metric Threading, 315 RPM, Tpr, 30HP, #22712

Manufacturer

SPARK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

22712

Dealer Location

New York

Seller is MDNA

39" X 236" Prok, Fanuc Oit, 12.5" Bore, Prog Tailstock, (2) 30" Chucks, 2014, #24044

Manufacturer

PROK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

24044

Dealer Location

New York

Seller is MDNA

USED, 36" X 120" POREBA WITH 12.5" HOLE, HOLLOW SPINDLE LATHE

Manufacturer

POREBA

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19464

Dealer Location

Texas

Seller is MDNA
Featured Machine

USED, 36" X 120" POREBA WITH 12.5" HOLE HOLLOW SPINDLE LATHE

Manufacturer

POREBA

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19463

Dealer Location

Texas

Seller is MDNA

USED, NISHIJIMAX NHC-180/200 HIGH SPEED CIRCULAR SAWING MACHINE

Manufacturer

NISHIJIMAX

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19720

Dealer Location

Texas

Seller is MDNA

USED, 40" x 120" MODERN HOLLOW SPINDLE LATHE WITH 14" HOLE

Manufacturer

MODERN

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19621

Dealer Location

Texas

Seller is MDNA

USED, MAZAK SLANT TURN 80N CNC HOLLOW SPINDLE LATHE WITH 21.5" SPINDLE BORE

Manufacturer

MAZAK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19719

Dealer Location

Texas

Seller is MDNA

USED, MAZAK SLANT TURN 80N CNC HOLLOW SPINDLE LATHE WITH 21.5" SPINDLE BORE

Manufacturer

MAZAK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19718

Dealer Location

Texas

Seller is MDNA

Used, Mazak Powermaster Chucker (PMC) CNC Lathe with 14.5" Spindle Bore

Manufacturer

MAZAK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19775

Dealer Location

Texas

Seller is MDNA

Used, Mazak Powermaster Chucker (PMC) CNC Lathe with 14.5" Spindle Bore

Manufacturer

MAZAK

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19774

Dealer Location

Texas

Seller is MDNA

USED, LODGE & SHIPLEY HOLLOW SPINDLE LATHE WITH 9.25" BORE

Manufacturer

LODGE & SHIPLEY

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

19732

Dealer Location

Texas

Seller is MDNA

44" x 157" Dean Smith CNC Hollow Spindle Lathe, Front & Rear Chucks, 13.75" Spl Hole, 3-SR, Heidenhain 4110 CNC, #32081

Manufacturer

DEAN, SMITH & GRACE

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

32081

Dealer Location

New York

Seller is MDNA

25" X 118" Dean Smith & Grace 25P Oil Country, 10.5"Hole, F&R Chks, Thrd, Tpr, '84 #23796

Manufacturer

DEAN SMITH & GRACE

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

23796

Dealer Location

New York

Seller is MDNA

Leblond Regal 36" x 144"- 5" hole

Manufacturer

BRANDT

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

None

Dealer Location

Illinois

Seller is MDNA

32' X 200' EDELSTAAL HOLLOW SPINDLE GAP BED ENGINE LATHE: STOCK #66525

Manufacturer

None listed

Type

LATHES, OIL FIELD & HOLLOW SPINDLE

Stock

66525

Dealer Location

Ohio

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |