Viewing 7 Results
Manufacturer - UNION
Seller is MDNA

71" x 78" Union TI-1800 Power Rotation, Power Infeed, Scales, 15 Ton Cap. '94 #26626

Manufacturer

UNION

Type

TABLES, ROTARY

Stock

26626

Dealer Location

New York

Seller is MDNA

69" x 118" T-Slotted Floor Plates, 14" Thick, Cast Iron, (4) Available, Matched, #30291

Manufacturer

UNION

Type

TABLES, FLOOR & LAYOUT PLATES, (Radial & Boring Mill)

Stock

30291

Dealer Location

New York

Seller is MDNA

78" x 71" Union Ti 1800,Power Infeeding Rotary Table, 30,000 Lb Cap, 49" Infeed, #22683

Manufacturer

UNION

Type

ROTARY TABLES

Stock

22683

Dealer Location

New York

Seller is MDNA

6.3" Union PCR 160 Plus, Ram Type ATC, AAC, X-590", Y-236", Z-59", 3500 RPM, TSC, 80 HP, 2012 #30930

Manufacturer

UNION

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE, CNC

Stock

30930

Dealer Location

New York

Seller is MDNA

6.3" Union PCR160 Ram Type, X-275", Y-196", Z-90.5", 118" x 118" B-Axis Table, 2800 RPM, 80 HP, Siemens 840D, '09 #31393

Manufacturer

UNION

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE, CNC

Stock

31393

Dealer Location

New York

Seller is MDNA

5.12" Union BFP 130, X-275", Y-118", Z-35", 67 HP, Heidenhain TNC 355, #20348

Manufacturer

UNION

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE, CNC

Stock

20348

Dealer Location

New York

Seller is MDNA

5.11" Union BFP-130-5, Column Tvl Horiz 98.4", Headstock V Tvl 62.9", DRO, 900 RPM, 1980

Manufacturer

UNION

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE

Stock

4887

Dealer Location

Maryland

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |