Tsugami NP-32, 1.26" Diameter, Twin 8-Position Turrets, Live Milling, Pickoff, LNS Bar Feed, Fanuc 0T S/N 9036, #29774
TSUGAMI
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
29774
New York
Tsugami BN20 6-Axis, .787" Turning Dia., 20-10,000 RPM, Fanuc 18iTB, 1000 PSI Coolant, Bar Feed, C-Axis, 2006, #30879
TSUGAMI
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
30879
New York
TSUGAMI B0205-II 20 mm, 5-axis, Fanuc 0i-TD, 2019
TSUGAMI
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
38522
California
TORNOS BS20 21mm Max. Dia., Spindle Speeds to 6,000-RPM, 1-Sub Spindle, 8-Cross Slides, Monoblock Collet, with 8-Spindle Automatic Bar Loader, Coolant System
TORNOS
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
38299
California
1" Tornos ST26, F 31iTB, 9-Ax, LNS Express Bar Ldr, LNS B/L,Turbo Chip Conv,2150 Cut Hrs
TORNOS
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
32429
California
2001 CITIZEN L20 VII 5M7
CITIZEN
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
496399
Maryland
Citizen A32 VllPL Swiss Type CNC Lathe
CITIZEN
AUTOMATIC SCREW MACHINES, SWISS TYPE, CNC
13900
Michigan
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Haas ST-30 Needed
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need Haas VF-3
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Need 2017 or newer 5-8 Axis 250-350 Ton press brake.
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
