A M Metalmaq, Inc.
320 E. 10th Court
Hialeah Florida 33010 United States
Phone: (305) 883-9200
Fax: (305) 883-0660
sales@ammetalmaq.com
www.ammetalmaq.com
A M Metalmaq, Inc. Listings
16" Blanchard No. 11, 11" Wheel, 15 HP, .465" Chuck, 1955 (6797)
BLANCHARD
GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle)
6797
Florida
4" G & L Fraser #70A-DP4-T6 X 72", 56" X 62" Cross, #50, DRO, 1969 (6454)
GIDDINGS & LEWIS FRASER
BORING MILLS, HORIZONTAL, TABLE TYPE
6454
Florida
22 Ton Bliss Mdl C-22, 2.75" Stroke, 8.5" Shut Ht, Air Clutch, 1989 (6983)
BLISS
PRESSES, O.B.I., FLYWHEEL, (Single Crank)
6983
Florida
18" X 20" Peerless VB-1820XL, Hyd Tilting Column, 1" Blade, Coolant, 1996, (3) Avail, (5944)
PEERLESS
SAWS, BAND, VERTICAL
5944
Florida
300 Ton, HTC, #300-14HS, 14' OA, 12'5" BH, 7" strk, 25 HP, tooling set, 1987
HTC
BRAKES, PRESS, HYDRAULIC (Inch/Ton)
7063
Florida
1/4" x 10', Durma, #MS-3006, 10'x 1/4, hyd., 39" PFOBG, 20 HP, 2004
DURMA
AIR COMPRESSOR ACCESSORIES
7091
Florida
1/4" x 10', ERMAK, #CNCHVR, hyd., 40" CNCBG, Automec CNC FG, 15 HP, 2007
ERMAK
AIR COMPRESSOR ACCESSORIES
6993
Florida
35 Ton Wysong No. H3552, 52" OA, 38" BH, 2.5" Str, 5 HP, 1984 (5765)
WYSONG
BRAKES, PRESS, HYDRAULIC (Inch/Ton)
5765
Florida
90 Ton, NIAGARA. Series IB-60, 12' OA, 10.6" BH, flush mount
NIAGARA
AIR COMPRESSOR ACCESSORIES
7092
Florida
30" KAO MING, 16" x 41" table, 1-1/2" cap, auto downfeed, tapping, 1982
KAO MING
AIR COMPRESSOR ACCESSORIES
6712
Florida
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Haas ST-30 Needed
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need Haas VF-3
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Need 2017 or newer 5-8 Axis 250-350 Ton press brake.
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |