Zimmermann FZ37 5-axis CNC Bridge Mill
ZIMMERMANN
MACHINING CENTERS, GANTRY TYPE, CNC
13481
Michigan
300 ton Verson S2-300-96-48t, New 1995
VERSON
PRESSES, STRAIGHT SIDE, DOUBLE CRANK, (Single Action)
2635
Michigan
Surftran C-250 Thermal Energy Method (TEM) Deburring Machine
SURFTRAN
DEBURRING MACHINES, THERMAL
M2023
Illinois
150 HP SULLAIR - 800cfm Fully rebuilt enclosed Air-Cooled Rotary Air Compressor - Has zero hours on professional rebuild.
SULLAIR
AIR COMPRESSORS, ROTARY SCREW/SLIDING VANE
3
No state listed
Southwestern TRAK TRL 1745S CNC Lathe For Sale - 2004
SOUTHWESTERN INDUSTRIES
LATHES, COMBINATION, CNC
None
Michigan
630MM X 3000M Plain Cylindrical Grinder Serial#8908
SMTW
GRINDERS, CYLINDRICAL, PLAIN
1
No state listed
USED, 36" X 120" POREBA WITH 12.5" HOLE HOLLOW SPINDLE LATHE
POREBA
LATHES, OIL FIELD & HOLLOW SPINDLE
19463
Texas
600 ton Minster E2-600-144-60 Hevi-stamper, New 2004
MINSTER
PRESSES, STRAIGHT SIDE, DOUBLE CRANK, (Single Action)
2620
Michigan
2007 MESSER MPC2012 CNC Precision Plasma/Oxygen Cutting System With 141" x 608" Table
MESSER
PLASMA CUTTERS
90-3194
Ohio
20,000 lbs Mecon Cradle Straightener Servo Feed Line
MECON
COIL FEED LINES
2595
Michigan
200 ton Komatsu Servo Press Model H2F200 New 2003
KOMATSU
PRESSES, STRAIGHT SIDE, DOUBLE CRANK, (Single Action)
2728
Michigan
2012 HANKOOK Protec 11NF - CNC Horizontal Lathe
HANKOOK
LATHES, COMBINATION, CNC
12949
Michigan
Haas EC-500 CNC Horizontal Machining Center - New 2007
HAAS
MACHINING CENTERS, HORIZONTAL, CNC (Incl. Pallet Changers)
33342
California
Doosan HC-400 CNC Horizontal Machining Center, Fanuc 32i, 15.75" Pallets, 10K Spindle, CAT-40, 6
DOOSAN
MACHINING CENTERS, HORIZONTAL, CNC (Incl. Pallet Changers)
13909
Michigan
Cincinnati #2OM CNC Centerless Grinder, Remanufactured, Up to 7-Axis, 24" Grinding Wheel
CINCINNATI
GRINDERS, CENTERLESS, CNC
None
Illinois
Wanted Machine
Coordinate Measuring Machines, All Types
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Water Jet Equipment, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92
Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |
Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
CNC Machines, Any
Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
Planer Mills, Openside Preferred, X-200" or More
Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |
CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer
Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |
Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis
Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |
Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.
Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year
Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |
48” Or larger radial drill. Must have a #5 taper. The newer the better.
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Haas ST-30 Needed
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Need Haas VF-3
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |
Need 2017 or newer 5-8 Axis 250-350 Ton press brake.
Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |
