Viewing 20 Results
Manufacturer - TOSHIBA
Seller is MDNA

Toshiba Universal Right Angle Head, Head Swivel, Compound Swivel, 26" Reach, #50 Taper, #30913

Manufacturer

TOSHIBA

Type

TOOLING & ACCESSORIES

Stock

30913

Dealer Location

New York

Seller is MDNA

118" x 118" Toshiba BR-30, 60 Ton Weight Capacity, CNC B-Axis 360,000 Position, Fanuc Servos, 47" Infeed, #28486

Manufacturer

TOSHIBA

Type

TABLES, ROTARY

Stock

28486

Dealer Location

New York

Seller is MDNA

75 HP TOSHIBA AC MOTOR, 365T FRAME, 230/460 VOLT, 1765 RPM: STOCK 16178

Manufacturer

Toshiba

Type

MOTORS, A.C., WOUND ROTOR, 3/60

Stock

16178

Dealer Location

Ohio

Seller is MDNA

Toshiba MCW-4624,5-Axis,X-137",Y-145",Z-35",180" Btw Columns,2-Axis Swivel Head, 36 ATC, Tosnuc PX100,2011 #30448

Manufacturer

TOSHIBA

Type

MILLERS, PLANER TYPE (Including Millers, Slab)

Stock

30448

Dealer Location

New York

Seller is MDNA

Toshiba MPC-2665B 5-Face, 180 ATC, X-295", Y-133", 102" BC, 3K RPM, F 15M, '05 #26258

Manufacturer

TOSHIBA

Type

MILLERS, PLANER TYPE (Including Millers, Slab)

Stock

26258

Dealer Location

New York

Seller is MDNA

Toshiba MCW-4624 5-Axis Double Column Type CNC Machining Center For Sale - 2017

Manufacturer

Toshiba

Type

MACHINING CENTERS, GANTRY TYPE, CNC

Stock

None

Dealer Location

Michigan

Toshiba MCW-4624 5-Axis Double Column Type CNC Machining Center, Tosnuc PX100, 138"/145"/35" Tra

Manufacturer

Toshiba

Type

MACHINING CENTERS, CNC, 5-AXIS or MORE

Stock

C0127

Dealer Location

Michigan

Seller is MDNA

196" X 787" Toshiba LCS-40200A, 157" OCS, 350 Ton, 650 HP, F 18i CNC, '77/'08 #26425

Manufacturer

TOSHIBA

Type

LATHES, ENGINE

Stock

26425

Dealer Location

New York

Seller is MDNA

Toshiba Model TUE-15 CNC Vertical Boring Mill, Mfg. 2007, Fanuc 0i-TC Control, 59" Table

Manufacturer

TOSHIBA

Type

BORING MILLS, VERTICAL, CNC

Stock

4145

Dealer Location

Massachusetts

Seller is MDNA

118"/216" Toshiba TSS 30/55A, Ram, Sliding Table, 216" Swing, 109" U/R, 80 RPM, DRO, 85 HP (VSD), #31310

Manufacturer

TOSHIBA

Type

BORING MILLS, VERTICAL - (Including Vertical Turret Lathes)

Stock

31310

Dealer Location

New York

Seller is MDNA

4.3" Toshiba BTD11HR16, X-78", Y-59",W-57", Z-19.6", 55" x 63" R.Tab, 3,000 RPM, 38-ATC, Tosnuc 999 CNC, 2017, #31926

Manufacturer

Toshiba

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31926

Dealer Location

New York

Seller is MDNA

4.33" Toshiba BTD-200QF, X-39", Y-39", 40 ATC, (2) Pallets, Thru Spindle Coolant, Chip Conveyor, Tosnuc 888 CNC #31015

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31015

Dealer Location

New York

Seller is MDNA

Toshiba BTD-110.R16, 4.3"" Spdl, X-78", Y-59.", Z-19.7", W-57", 63"x 55" Tbl, .001 Deg, 2500 RPM, Tosnuc 888, #31013

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31013

Dealer Location

New York

Seller is MDNA

5.12" Toshiba BTD 13FR22, 90ATC,X118",Y90.5",71"X86"B-Ax Tbl,2500 RPM,TSC,'97 #29914

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

29914

Dealer Location

New York

Seller is MDNA

4.33" Toshiba BP-110-P20, X-100", Y-65", 3K RPM, Tosnuc 888, #31424

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31424

Dealer Location

New York

Seller is MDNA

5.12" Toshiba BP-130.P40, X-160", Y-90", 70" x 155" Table, 55,000 Lb Weight Capacity, TSC, 40 HP, Tosnuc 888 #31711

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31711

Dealer Location

New York

Seller is MDNA

5.12" Toshiba BP-130.P40, X-160", Y-90", 70" x 155" Table, 55,000 Lb Weight Capacity, TSC, 40 HP, Tosnuc 888 #31708

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31708

Dealer Location

New York

Seller is MDNA

4.33" Toshiba BP-110-P20, Tosnuc 888, X-100", Y-65",TSC, 38-ATC, 3K RPM, B-Axis Table, #31014

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, TABLE TYPE, CNC

Stock

31014

Dealer Location

New York

Seller is MDNA

5.12" Toshiba BF-130B, X-354", Y-118", Z-39", W-17", 1600 RPM, BT-50, Fanuc 31iB CNC, 2016, #31919

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE, CNC

Stock

31919

Dealer Location

New York

Seller is MDNA

5.12" Toshiba BF13AQ, X236,Y98,Z35", #50 Tpr, Pendant Ctrl, Hard Ways, 3-Ax DRO, #27469

Manufacturer

TOSHIBA

Type

BORING MILLS, HORIZONTAL, FLOOR TYPE

Stock

27469

Dealer Location

New York

Wanted Machine

Coordinate Measuring Machines, All Types

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Water Jet Equipment, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Lathe, Mazak Powermstr 1600, 42"Sw O/Ways w/51"Gap or 34"SOW w/41"Gap, '82-92

Requested by: A. Green Co., Inc. Phone | (508) 791-6800 Email | sales@agreenco.com Interested |

Horizontal Machining Center, Makino A-61, Up To 3 Wanted, 2001+

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Vertical Machining Center, DMG DMU 100P, 2008 or Later, P-Machine Only

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

CNC Machines, Any

Requested by: MACHNET, Inc. Phone | (310) 909-2020 Email | sales@machnet.com Interested |

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Floor Type HBM, 4"-6", 144" X-Axis Travel, Overall Length Needs To Be Less Than 20'

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

Planer Mills, Openside Preferred, X-200" or More

Requested by: Prestige Equipment Corp.- Terry Phone | (631) 249-5566 Email | terry@prestigeequipment.com Interested |

CNC VMC, 5-Axis, 80” X-Tvl, Swivel Head, Dbl Column or C-Frame Is Okay, Immediate Buyer

Requested by: Prestige Equipment Corp.- Paul Phone | (631) 249-5566 Email | paul@prestigeequipment.com Interested |

Wanted - CNC slant bed lathe, 15-20 years old ok. 36 inches between centers, 10 inch chuck. No bar feeder. Operator programmable, turret (12 stations ok)

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Wanted - HMC with no pallets, with rotary and ATC. Prefer an old boring Mill. 30" or more on Y axis

Requested by: JBM Technologies Phone | (215) 672-8878 Email | used@jbmtechnologies.com Interested |

Need 12' OAL, 10'6" BH, minimum 120 tons, 1 or 2 axis CNC back gauge like Hurco/Automec, good running machines only.

Requested by: A M Metalmaq, Inc. Phone | (305) 883-9200 Email | sales@ammetalmaq.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Marvel 81A (or equivalent) fully automatic vertical bandsaw complete with 20’ in / 20’ out powered roller conveyor

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Shotblast system for 36” wide flange beams with a flange height of 14” – 16”. Also want a minimum of 20’ in / out feed conveyor.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Two or three basket tube coilers for small diameter tubing from tube mill. Yoder or similar, any year

Requested by: Universal Tube & Rollform Phone | (419) 872-2364 Email | sales@utubeonline.com Interested |

48” Or larger radial drill. Must have a #5 taper. The newer the better.

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Plastic vibration welding machine similar to a Bielomatik 3220 (low frequency machine).

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Haas ST-30 Needed

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Need Haas VF-3

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Requested by: Westbrook Engineering Phone | (586) 759-3100 Email | marty@westbrook-eng.com Interested |

Need 2017 or newer 5-8 Axis 250-350 Ton press brake.

Requested by: Southern Fabricating Machinery Sales, Inc. Phone | (813) 444-4555 Email | sales@southernfabsales.com Interested |