Gleason Model 106 Hypoid Gear Generator

Manufacturer

GLEASON

Category

Gear Machines

Type

GEAR GENERATORS, BEVEL, (Spiral/Hypoid)

Stock

GH1073

Model

106

Dealer Location

Illinois

Request a Quote
View Contact Information

Spec Sheet

Cone Distance Max (30" Spiral Angle & 7-1/2" Cutter) - 4-1/4"
Gear Pitch Diameter Max - 10 to 1
10 to 1 Ratio - 8 - 1/2"
2 to 1 Ratio - 7 - 1/2"
1 to 1 Ratio - 6"
Diametral Pitch (Coarsest) - 4
Full Depth Max - .625"
Face Width Max - 1 - 1/4"
Number of Teeth - 5 to 150
WORK SPINDLE - :
Diameter of Taper Hole at Large End - 3 - 29/32"
Taper per Foot - 89/64"
Depth of Taper - 6"
Diameter of Hole Through Spindle - 2 - 7/16"
Diameter of Spindle Nose - 5 - 11/82"
Cutter Diameter - 3 - 1/2", 4 - 1/2", 5", 6", 7 - 1/2"
WORK HEAD - :
Offset Above Center Max - 8"
Offset Below Center Max - 8"
Distance from Machine Center to Nose of Spindle Max - 9"
Distance from Machine Center to Nose of Spindle Minimum - 1 - 1/4"
Cutter Speeds - 54 - 418 RPM
Feeds (seconds per tooth) - 5 - 73 seconds
Feed Motor - 5 HP, 1800 RPM
Hydraulic Motor - 1 HP, 1800 RPM
Coolant Motor - 1/2 HP, 8600 RPM
Floor Space - 84" x 61"
Net Weight - 15,500 lbs


EQUIPPED WITH:

Completer with Helical Motion and Roll Centering. Hydraulic Chucking. Change Gears. Automatic Stop Counter. Stock Divider. Coolant with Magnetic Chip Separator. Drawings.

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote