Kalamazoo K16-18 Industrial Cutoff Saw

Manufacturer

KALAMAZOO INDUSTRIES

Category

Saws

Type

SAWS, CUT-OFF

Stock

None

Model

K16-18

Dealer Location

Ohio

Request a Quote
View Contact Information

Spec Sheet

Manufacturer - Kalamazoo Industries, Inc.
Model - K16-18
Serial No. - 415353
Cutting Capacity - 3” Solid & 4” Mild Steel w/ the correct cutoff wheel/blade
Table Dimension - 16”W x 28”D
Table Vise - Fast, Foot Operated chain vise
Saw Stand - Rigid Steel Base
Abrasive Wheel Size - 16” or 18” Diameter wheel
Wheel RPM - 2500 Spindle RPM
On/Off Switch - Magnetic On/Off Switch
Spark Chute - Efficient Spark Chute
Drive Belt - Heavy Duty Steel Belt — With Heavy Duty Wheel & Belt Guards
Motor Specs - 10Hp TEFC 3-Phase
Electrical Specs - 240V, 3-Phase, 24amps, 50/60 Hz (unit is already wired for this voltage)
Weight - Approx. 620lbs (shipping weight)
Machine Dimensions - 36”L x 67”W x 64”H (shipping dims) (approx)
Manufacture Date - N/A
EXTRAS: - One Pack (total of 10 - one on the machine nine in the box) 16” x 5/23” x 1” United Abrasives Type 1 Cutoff wheel for metal
Seller Note: - Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and some minor wear but none affecting the functionality or the intended use of the unit. What you see in the pictures is what is included in sale There is  ONE Pack of (10 total - one on the machine and 9 in the box) 16” x 5/32” x 1” Type 1 Cutoff wheels with the unit. This unit has been run and as such unit is being sold AS IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.


Kalamazoo K16-18 

Industrial Cutoff Saw

Manufacturer:

Kalamazoo Industries, Inc.

Model:

K16-18

Serial No.:

415353

Cutting Capacity:

3” Solid & 4” Mild Steel w/ the correct cutoff wheel/blade

Table Dimension:

16”W x 28”D

Table Vise:

Fast, Foot Operated chain vise

Saw Stand:

Rigid Steel Base

Abrasive Wheel Size:

16” or 18” Diameter wheel

Wheel RPM:

2500 Spindle RPM

On/Off Switch:

Magnetic On/Off Switch

Spark Chute:

Efficient Spark Chute

Drive Belt:

Heavy Duty Steel Belt —  With Heavy Duty Wheel & Belt Guards

Motor Spec:

10Hp TEFC 3-Phase

Electrical Specs:

240V, 3-Phase, 24amps, 50/60 Hz (unit is already wired for this voltage)

Weight:

Approx. 620lbs (shipping weight)

Machine Dimensions:

36”L x 57”W x 64”H (shipping dims) (approx)

Manufacturer Date:

N/A

 

 

EXTRAS INCLUDED:

One Pack (total of 10 - one on the machine nine in the box) 16” x 5/23” x 1” United Abrasives Type 1 Cutoff wheel for metal

 

 

Seller Note:

Unit is USED - BUT IN LIKE NEW CONDITION - UNIT WAS NEVER USED IN PRODUCTION - ONLY TEST CUTS WERE MADE - FACILITY CLOSED BEFORE SAW WAS PUT INTO PRODUCTION. There are some visible minor surface scratches and some minor wear but none affecting the functionality or the intended use of the unit. What you see in the pictures is what is included in sale There is  ONE Pack of (10 total - one on the machine and 9 in the box) 16” x 5/32” x 1” Type 1 Cutoff wheels with the unit. This unit has been run and as such unit is being sold AS IS, WHERE-IS, AS-SHOWN. Pictures and video are of the actual unit being purchased. If the buyer has any questions, please feel free to ask.

 

 

 

 

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote