60 TON HYDRAMET MODEL HCW 60 XL POWDER COMPACTING PRESS

Manufacturer

HYDRAMET

Category

Presses

Stock

PP1331

Model

HCW 60 XL

Dealer Location

Illinois

Spec Sheet

Weight - 12000 pounds
Pressing Force Upper Ram (max – adj) - 61 Tons
Die Eject (withdrawal) Force in % of Press Force - 65%
Die Support Force (adj.) in % of Press Support - 124%
Minimum Pressing Force - 6 Tons
Powder Fill Depth (max -fully adj.) - 5 in.
Stoke of Upper Ram (max – 2” adj.) - 9 in.
Upper Die Area - 11.25 “ x 17.25”
Maximum Opening (upper plate to die) - 48.12”
Maximum Upper Ram Speed in./sec.: - Down (uploading): 17.4 Down (pressing – adj.): 0.9 Up (clear): 9.2
Maximum Die Ram Speed in./sec.: - Down (unloading – adj.): 11.65 Down (max ejection force – adj.): 1.4 Up (filling – adj.): 6.1
Pump Motor @ 1800 RPM - 27.5 HP
Maximum Cycles/Min. - Minimum Ram Stroke (Min Tons: 84, Mid Tons: 56, Max Tons 42) 5” Fill Depth (Min Tons: 16, Mid Tons: 15, Max Tons 14)


EQUIPPED WITH:
Withdrawal Action for Both Pressing and Ejection with Selectors for Ejection Only, Fraction or Forced Float. Independent Run Speeds for Approach, Press and Retract. 3-Speed Die with Adjustable Press. Eject and Fill. Upper Ram Pressure and Temperature Controls. 4 Post Design with Removable Die Set-Up. Adjustable Tonnage and Die Resistance. Upper Arm Weight Control for Top Punch Hold-Down. Feed Shoe Jog. Adjustable Cycle Start Delay. Pre-Press Dwell. Press Dwell. Eject Delay.

This machine is being offered thoroughly checked out in our shop, cleaned, and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant.

No Video Available

Want to request a quote from the owner of this listing?

Request a Quote